It is when you break large hydrocarbons/alkanes, into smaller more useful alkanes/alkenes.
For example a large hydrocarbon in crude oil is Bitumen. By passing this substance over a hot catalyst, you can break it down into smaller hydrocarbons such as Petrol or Diesel
That depends what the monomer is. Most unsaturated monomers are manufactured commercially from crude oil. Ethene, for instance, is made by cracking the gas oil fraction of crude oil. Vinyl chloride is then made from ethene. Styrene is made from benzene and ethene.
Oil cracking is a process used to break down complex hydrocarbons in crude oil into simpler molecules like gasoline and diesel. The extraction of oil cracking involves heating the oil at high temperatures and breaking the larger molecules into smaller ones through thermal or catalytic methods, resulting in a higher yield of useful products.
Light cycle oil is a byproduct of the fluid catalytic cracking process in oil refineries. It is called cycle oil because it is recycled back into the cracking unit to improve the efficiency of the process and maximize the production of high-value products like gasoline and diesel.
Products made from cracking include gasoline, diesel, jet fuel, propane, butane, and ethylene. These products are derived from the refining of crude oil or natural gas through the process of cracking, which breaks down larger hydrocarbon molecules into smaller ones.
Propene is obtained from crude oil through a process called steam cracking, where long-chain hydrocarbons in crude oil are broken down into smaller molecules such as propene. This process involves heating the crude oil to high temperatures in the presence of steam, which causes the hydrocarbons to undergo thermal decomposition and form propene along with other byproducts.
That depends what the monomer is. Most unsaturated monomers are manufactured commercially from crude oil. Ethene, for instance, is made by cracking the gas oil fraction of crude oil. Vinyl chloride is then made from ethene. Styrene is made from benzene and ethene.
Cracking of oil fractions requires high temperatures (500-700 degrees Celsius) and the presence of a catalyst to break down larger hydrocarbon molecules into smaller, more useful ones like gasoline and diesel. The process can occur under either high pressure or in the presence of steam to facilitate the reaction.
To fix cracking in an oil painting, you can consult a professional art restorer who can carefully apply a conservation treatment to stabilize and repair the cracks.
modern tech is to expensive so cracking IS USED BECAUSE IT IS CHEAP AND EASY
Oil cracking is a process used to break down complex hydrocarbons in crude oil into simpler molecules like gasoline and diesel. The extraction of oil cracking involves heating the oil at high temperatures and breaking the larger molecules into smaller ones through thermal or catalytic methods, resulting in a higher yield of useful products.
Magic. :D
cracking wastes almost nothing and therefore is useful, cracking rearanges the carbon molecule that are big into smaller using therma decomposition,idiot;)
Keeps the skin moist and prevents it from drying or cracking.
Cracking is a process used in oil refineries to break down larger hydrocarbon molecules into smaller ones, which are more valuable and in higher demand, such as petrol and other oil fractions. By cracking heavier components of crude oil, refineries can produce more of these high-demand products efficiently.
"Cat cracking" is the process used to break crude oil down into gasoline, kerosene, adn fuel oils.
Cracking is important in oil refining because it breaks down larger hydrocarbon molecules into smaller, more valuable ones such as gasoline and diesel. This process increases the overall yield of high-demand products and helps to optimize the use of crude oil feedstock. Additionally, cracking can improve the efficiency and profitability of the refining process.
Light cycle oil is a byproduct of the fluid catalytic cracking process in oil refineries. It is called cycle oil because it is recycled back into the cracking unit to improve the efficiency of the process and maximize the production of high-value products like gasoline and diesel.