A open hot, is simply a broken connection on your "hot wire" or the wire that carries the voltage from your breaker to your device. Typically these connection are broken either at the device e.g., outlet, switch, etc. or they are cause by a poor connection in a wire nut.
"Open hot" means that there is no power coming to the outlet's hot wire, which carries electricity. This could be due to a tripped circuit breaker, a damaged wire, or a faulty outlet. It is important to address this issue promptly to avoid electrical hazards.
Hot salt water is good for an open sore infection.
An open circuit occurs when there is a break in the electrical path, cutting off the flow of current. When a hot wire touches ground, it can create a short circuit where current flows directly to ground instead of through the intended circuit, leading to potential danger and damage to the equipment.
solids contract when cold and expand when heated. the bottle containing the drink will expand and so the cap, being just fractions of an inch smaller will open
No current flows in the circuit when the circuit is open, as in when the appliance is switched off. The voltage is on the "hot" side of the switch when it is in the open position but the neutral is not energized until the switch is closed.
You cant.
To get inside you have to open a door. When it gets hot I open the windows.
You know it by touching and feeling the pipes on the hot water side; if they are hot, there is water running through the pipes and obviously the heater valve is open on hot side.
The system is open.
No, it is not safe to leave an open hot oven unattended as it can pose a fire hazard and increase the risk of accidents.
Hot water causes the jar lid to expand.
yes it is because it is hot there
"Open hot" means that there is no power coming to the outlet's hot wire, which carries electricity. This could be due to a tripped circuit breaker, a damaged wire, or a faulty outlet. It is important to address this issue promptly to avoid electrical hazards.
Hot salt water is good for an open sore infection.
The term "open hot" in electrical wiring refers to a situation where the hot wire in a circuit is not connected properly or is disconnected, resulting in a lack of power flow to the device or appliance.
It's not advisable to use hot water on open wounds. Hot water can cause further irritation and damage to the tissue, potentially increasing the risk of infection and delaying the healing process.
run lid over hot water and open with a cloth over lid.