0
What else can I help you with?
What industrial plant is iron extracted from?
Iron is primarily extracted from iron ore in a blast furnace at an iron and steel plant. The iron ore is first processed into iron oxide, which is then reduced to metallic iron using carbon as a reducing agent in the blast furnace.
What size breaker for furnace?
The size of the breaker for a furnace will depend on the specific requirements of the furnace unit. It is recommended to check the furnace's user manual or consult with a qualified electrician to determine the correct breaker size for your particular furnace model. Using the wrong size breaker can be a safety hazard.
Why is a blast furnace called a blast furnace and not a furnace or fire furnace?
The basic concept of a blast furnace hasn't changed in more than 100 yrs. Modern furnaces are of course more complex due to newer technologies. First of all the furnace is basically a steel tank, inside it is lined with brick or gunite. The outside shell is protected from the heat by hundreds of "coolers" which are located around the entire furnace. Coolers are usually made from copper and have water inlets and outlets; water does not enter the inside of the furnace but is circulated in a closed loop system through a network of piping. At the bottom of the furnace are openings called tuyeres (ta-weers) through which hot air is blown into the furnace. The tuyeres are connected to a large brick-lined pipe called a bustle pipe. The bustle pipe is connected to a series of very large stoves. Outside air is fed into the stoves where it is heated. The heated air is then blown into the bustle pipe, through the tuyeres and into the furnace. The tuyeres can also be piped to allow the use of oxygen, pulverized coal, and natural gas to enhance the heat. Raw material is loaded into the top of the furnace by conveyor or a skip car which runs on a track pulled by cables. The raw materials are iron ore, limestone, coke and alloys chosen by the steelmaker. At the bottom of the furnace is an opening called the tap hole. The tap hole is plugged by a machine called a mud gun, the mud gun is loaded by hand with "mud" which is a high grade refractory that does not melt under the intense heat. After the materials reach the desired temp (usually about 3500 deg F) another machine called a tap drill drills out the mud to let the molten metal out of the furnace; this is known as "casting". Molten metal and slag are separated by a series of channels, slag (girl) will flow to a pit or slag car to be carried away. The slag is cooled to be used in a variety products such as an additive in concrete. The metal is channeled to bottle cars to be transported to different areas of the mill for processing. This is a very basic overview of a blast furnace, they are highly complex and very dangerous!
The processes of extracting and processing iron ore?
Iron ore is extracted via mining methods such as open-pit or underground mining. Once extracted, the ore is crushed and then separated from impurities using magnetic separation or flotation. The refined iron ore is then processed in blast furnaces to produce molten iron, which is further refined into steel.
How do you hook propane gas line to gas furnace?
To hook a propane gas line to a gas furnace, you will need to connect the gas line to the furnace using approved fittings or connectors. It is important to ensure that the gas line is correctly sized for the furnace's gas requirements and that all connections are secure and leak-proof. It is advisable to hire a professional to install the gas line to avoid any safety hazards.
Extraction of lead from galena by heating process?
First: Roast the Galena in a blast furnace for 30 minuets. Second: Add Carbon to the blast furnace to remove impurities. Third: Tag off your lead from the bottom of the blast furnace.
What are the methods of calcium extraction?
Some common methods of calcium extraction include electrolysis, using a blast furnace with coke, and the reduction of calcium oxide using aluminum in a thermite reaction. These methods are used to extract calcium from its various ores or compounds.
Why is iron cheaper than other metals by using the blast furnace?
Partly due to scale of manufacture, partly due to the cheap and simple method of extraction from the ore, partly due to the ease with which the adundant ore can be mined, partly due to the high (compared to many metals) metal content of ores.
Why is a blast furnace called a blast furnace and not a furnace or fire furnace?
The basic concept of a blast furnace hasn't changed in more than 100 yrs. Modern furnaces are of course more complex due to newer technologies. First of all the furnace is basically a steel tank, inside it is lined with brick or gunite. The outside shell is protected from the heat by hundreds of "coolers" which are located around the entire furnace. Coolers are usually made from copper and have water inlets and outlets; water does not enter the inside of the furnace but is circulated in a closed loop system through a network of piping. At the bottom of the furnace are openings called tuyeres (ta-weers) through which hot air is blown into the furnace. The tuyeres are connected to a large brick-lined pipe called a bustle pipe. The bustle pipe is connected to a series of very large stoves. Outside air is fed into the stoves where it is heated. The heated air is then blown into the bustle pipe, through the tuyeres and into the furnace. The tuyeres can also be piped to allow the use of oxygen, pulverized coal, and natural gas to enhance the heat. Raw material is loaded into the top of the furnace by conveyor or a skip car which runs on a track pulled by cables. The raw materials are iron ore, limestone, coke and alloys chosen by the steelmaker. At the bottom of the furnace is an opening called the tap hole. The tap hole is plugged by a machine called a mud gun, the mud gun is loaded by hand with "mud" which is a high grade refractory that does not melt under the intense heat. After the materials reach the desired temp (usually about 3500 deg F) another machine called a tap drill drills out the mud to let the molten metal out of the furnace; this is known as "casting". Molten metal and slag are separated by a series of channels, slag (girl) will flow to a pit or slag car to be carried away. The slag is cooled to be used in a variety products such as an additive in concrete. The metal is channeled to bottle cars to be transported to different areas of the mill for processing. This is a very basic overview of a blast furnace, they are highly complex and very dangerous!
Do you have to purchase a new furnace to get central AC or can central AC be added with an existing furnace using the existing duct work?
My parents did it with existing ductwork.
What is technology of oil fired furnace?
An oil fired furnace works by using oil and a flame. The oil is sent through a tube to the burner area of the furnace and when the oil is ignited with a lighter, the flame can be adjusted according to how much heat is necessary.
What might be the problem with the Heat furnace if I have heat upstairs and no heat downstairs The thermostat checked fine. I suspect the relay.?
Itrelay depends on how old the furnace is modern units have a computer chip that controls the unit as older ones do not. I wold check the low voltage wiring to the thermostat. If that is not the problem and you are using two separate furnace one up stairs and one down I would check the transformer. How ever if one furnace heats both stories it could be a bad connection in the low voltage wiring or a broken wire. However I recommend a new thermostat simply because your old thermostats are probley out dated and very inefficient If this dose not help e-mail me at 8120355@gmail .com
What does square the circle mean?
to construct (using a compass and straight-edge) a square with the same area as a given circle using only a finite number of steps. "Squaring the circle" was an ancient problem that has been proved impossible to do.
How Is Iron Ore Purified using Carbon?
Iron ore, carbon (also called 'coke') and limestone are heated in a blast furnace. The carbon reacts with oxygen blasted into the furnace from the bottom to form carbon monoxide. Carbon monoxide then reduces the the iron ore to molten iron and becomes carbon dioxide in the process. The limestone in the furnace melts the impurities and decomposes to calcium oxide (quicklime). Quicklime and impurities mix together to form 'slag'. The slag floats on top of the molten iron so that the iron can be drained off at the bottom.
Where is steel found?
Steel is primarily made from iron ore along with other elements such as carbon. Iron ore is mined from the earth and then processed in a blast furnace to create steel. Steel can also be recycled from scrap metal.
Can home heating oil be substituted for kerosene in a kerosene heater if your furnace isn't working?
No way hosea! Is it possible if you have the right setup. It all depends on what type of furnace you are using Not without causing further problems - in mobile home furnaces especially. Using heating oil in a smaller system can result in clogged nozzles and filters causing the system to malfuntion or even worse OVERHEAT causing fire danger. Also straight kerosene won't gel in colder temperatures like heating oil will
How do you convert 1 metric ton of furnace oil to 1 liter of furnace oil?
you would convert it buy using specific gravity. the specific gravity of fuel oil is 0.893 at 60F. so that said 1 liter of furnace oil would weigh 893g. one metric tonne of furnace oil would equal roughly 1120 liters
