0
A strimmer, also known as a string trimmer or weed whacker, is used for cutting grass and weeds in areas that are difficult to reach with a lawnmower, such as along edges, around trees, and in flower beds. It utilizes a spinning nylon line to trim vegetation quickly and efficiently. Strimmers are versatile tools, often used for maintaining gardens, parks, and other landscaped areas. They can also be used for more precise trimming and shaping of plants.
What else can I help you with?
What is the mix of oil petrol for pro-plus strimmer?
The Pro Plus strimmer typically requires a mix of oil and petrol in a ratio of 50:1, which means 50 parts petrol to 1 part two-stroke engine oil. For example, you would mix 100 ml of oil with 5 liters of petrol. Always refer to the specific user manual for your model to confirm the correct mix, as it may vary. Proper mixing is crucial for optimal performance and to prevent engine damage.
What is the use of acetal?
dilute ethanoic acid is used as a preservative in the preparation of pickles.it is used for making cellulose acetate which is an important artificial fibre.it is used in the manufacture of acetone and esters used in perfumes.it is used in the preparation of dyes.it is used to coaggulate rubber from latex.it is used for making white lead which is used as a white paint.it is used as a chemical reagent in chemistry lab.
How is visible light used in photography?
In much the same way as sound is used in music, food is used in cooking, and soil is used in agriculture.
What microscope is used for observing yeast mitochondria?
Light microscope cannot be used. An electron microscope houl b used
What are volcanoes used for?
volcanoes are used for nothing
How do you moe the lawn?
with a lawn moer or a strimmer
What cuts grass and starts with Str?
Strimmer.
How do you open the strimmer to replace line?
Take it to a shop
Why does your strimmer line keep breaking?
Could be a number of reasons. The line is old "if so it tends to break easily" or inexpensive strimmer line can be suseptable to snapping easily.
What is oil petrol ration for Efco 220 Strimmer?
25-1
What is the oil to petrol ratio for a 2 stroke Tondu garden Strimmer?
I have a Tondu S180 strimmer. The petrol to oil ratio is 25:1. This information is embossed on the fuel tank filler cap on my machine. Peter.
How do you fill flymo strimmer spool?
To fill a Flymo strimmer spool, first, remove the spool from the strimmer by pressing the tabs or unscrewing it, depending on the model. Next, take the appropriate length of trimmer line (usually specified in the user manual) and insert one end into the spool's designated slot, then wind the line around the spool in the direction indicated by the arrows. Leave some line free at the end, then secure it by slotting it into the spool's holding notches. Finally, reattach the spool to the strimmer and ensure it is locked in place.
What is the fuel oil mix mcculloch silver eagle 28 grass strimmer?
40to1
What is best fuel mix ratio for kawasaki tg 33 strimmer?
kawasaki tg33
What is bump feed on grass strimmer?
Bump feed on a grass strimmer refers to a mechanism that allows the user to release more cutting line by tapping the strimmer head against the ground while operating it. This action causes a spool inside the head to advance the line, providing a fresh length for cutting without the need to stop and manually adjust the line. It enhances efficiency and convenience, making it easier to maintain a consistent cutting performance.
How do you rethread a double strimmer?
To rethread a double strimmer, first, ensure the strimmer is turned off and unplugged. Remove the spool from the trimmer head by pressing the release tabs and pulling it out. Cut a length of trimmer line, typically around 20-25 feet, and thread it through the spool's holes, winding it evenly in the designated direction. Finally, replace the spool back into the trimmer head, ensuring the line is properly fed through the exit holes, and you're ready to go.
How do you extend cutting cord on ryobi strimmer?
To extend the cutting cord on a Ryobi strimmer, first ensure the strimmer is turned off and unplugged for safety. Locate the spool cover and remove it by pressing the tabs or unscrewing it, depending on the model. Then, pull out the existing cord, and if needed, feed new cutting line through the spool according to the manufacturer's specifications, winding it in the correct direction. Finally, reattach the spool cover and trim any excess line to the desired length.
