In fluorescent tubes the number represents the diameter of the tube. The tubes are measures in 1/8ths of an inch. T8 would be 8/8ths or 1 inch. T5 would be 5/8ths of an inch. Older fixtures took T12 which would be 12/8ths or 1.5 inches.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
In a T* ballast and T8 bulb more energy efficient then a T12 ballast and a T8 bulb? A:Depends on the CURRENT through the tube. When the Tube is run at 100% of rating, The T12 Takes more CURRENT to give a certain Brightness. Because the surface of the T8 is closer to the ion stream through the tube, it takes less CURRENT to light up the T8 to the same brightness. However, IF you use a T12 in a T8 ballast, you will get LESS CURRENT through the tube, and LESS POWER consumed ALONG with LESS Light.
Yes a T12 lamp socket will take a T8 tube. The T8 tube will not operate. The T8 ballast is an electronic ballast where as the T12 ballast is a magnetic type. If you are changing over fluorescent fixtures to the smaller T8 lamps then the ballast has to be changed and the end sockets have to be rewired. The schematic on how to do the rewire is on the electronic ballast's label.
No, it is not recommended to use a higher-wattage bulb in a fixture than what the ballast is designed for. Using a 34 watt T8 bulb with a 40 watt T12 ballast can lead to decreased efficiency, increased risk of damage to the ballast and bulb, and potential safety hazards. It is best to match the bulb wattage with the ballast rating for optimal performance and safety.
It depends on the wattage of each T12 fluorescent tube. However, a typical T12 fluorescent tube is around 40 watts. So, if you have a total of 200 watts available, you could power five T12 fluorescent tubes.
Yes, a T8 bulb can fit in a fixture designed for T12 bulbs as long as the wattage and length of the T8 bulb are compatible with the fixture.
no
The main difference between a T8 and T12 bulb is their size and energy efficiency. T8 bulbs are smaller in diameter and more energy efficient than T12 bulbs. T8 bulbs also produce more light output for the same amount of energy compared to T12 bulbs.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
The benefits of using a T12 fluorescent bulb include energy efficiency, long lifespan, and good color rendering. Compared to other lighting options, T12 bulbs are cost-effective and provide bright, even light distribution.
In a T* ballast and T8 bulb more energy efficient then a T12 ballast and a T8 bulb? A:Depends on the CURRENT through the tube. When the Tube is run at 100% of rating, The T12 Takes more CURRENT to give a certain Brightness. Because the surface of the T8 is closer to the ion stream through the tube, it takes less CURRENT to light up the T8 to the same brightness. However, IF you use a T12 in a T8 ballast, you will get LESS CURRENT through the tube, and LESS POWER consumed ALONG with LESS Light.
Yes a T12 lamp socket will take a T8 tube. The T8 tube will not operate. The T8 ballast is an electronic ballast where as the T12 ballast is a magnetic type. If you are changing over fluorescent fixtures to the smaller T8 lamps then the ballast has to be changed and the end sockets have to be rewired. The schematic on how to do the rewire is on the electronic ballast's label.
T8 bulbs are more energy efficient and brighter than T12 bulbs. T8 bulbs use less energy to produce the same amount of light as T12 bulbs, making them a more efficient choice. Additionally, T8 bulbs are typically brighter and have a longer lifespan compared to T12 bulbs.
T8 bulbs are more energy-efficient than T12 bulbs because they use less electricity to produce the same amount of light. T8 bulbs also have better performance in terms of brightness and lifespan compared to T12 bulbs.
Depends on the ballast most of the newer electronic ones work on a wide range of lamps and input voltages and one or two lamps
Oh, dude, you're really getting into the nitty-gritty of light bulbs, huh? So, the main difference between those two is the diameter of the bulb. The F20-T12 CW bulb has a diameter of 1.5 inches (12/8 inch) while the F20-T9 CW bulb has a diameter of 1.125 inches (9/8 inch). It's like comparing a regular-sized straw to a slightly thinner one - they both do the job of holding your drink, but one's just a bit slimmer.
A T8 light bulb is a type of fluorescent tube that is 1 inch in diameter. It differs from other types of light bulbs, such as T12 or T5, in terms of size and energy efficiency. T8 bulbs are more energy efficient and have a longer lifespan compared to T12 bulbs, making them a popular choice for commercial and residential lighting.