0
I believe you are asking about under-cabinet microwave ovens. There is no electrical code rules for spacing between the stove top and the bottom of an under-cabinet microwave oven other than to "follow the manufacturer's instructions". The manufacturers of both appliances probably have substantial requirements in their instructions relating to the spacing.
What else can I help you with?
What is the space needle zip code?
The ZIP code of the Space Needle is 98168. The full address of the Space Needle is: 400 Broad Street Seattle, WA 98109
Is it legal to use aluminum wire for a stove or dryer in Florida?
aluminum wire violates code for any use anywhere in US. If this is true, why would aluminum wire be sold? I know it is used for service entrance.
What is the standard height for an electrical switch in the Philippine electrical code?
According to the Philippine Electrical Code, the standard height for an electrical switch is typically between 1.2 meters (approximately 4 feet) and 1.3 meters (about 4.3 feet) above the finished floor. This height is designed to ensure accessibility for most users. However, specific requirements may vary based on the type of building or the intended use of the space. Always refer to the latest code or local regulations for compliance.
Does a microwave have to be plugged into a GFCI outlet?
It is not required for a microwave to be plugged into a GFCI outlet, but it is recommended for safety reasons, especially in locations like kitchens or bathrooms where there may be water present. GFCI outlets help protect against electrical shocks in wet environments.
Does a microwave need a 15 or 20 amp circuit?
By code you're supposed to have a dedicated 20 amp circuit. But if you have an existing 15 amp circuit it might be fine for now if your microwave is 1400 watts or less and there's nothing else drawing power from that circuit. But if your running it new definitely run a 20 amp circuit dedicated on 12 gauge wire. That will allow you to use any microwave you want now and in the future.
What is the height that the over-the-range or OTR microwave has to be above the stove?
I belive it is 18" to 20" . Check owners manual it should say . Or look up building code in local area .
Is it dangerous to use a GE stove when the f2 code is on?
is it dangerouo to use a ge model gsp26bodiwh stove when the F2 code i on
What does the whirlpool stove code F2 indicate?
The whirlpool stove code F2 indicates a problem with the oven temperature sensor.
Is there a code for space in Morse code?
Yes, the Morse code for a space is represented by a short pause or silence between letters and a longer pause between words. It serves as the separator between characters and words in Morse code transmissions.
What is CSS padding?
Padding is the inner space between the border and content of an HTML tag.The code below would have a small space between the border and content of the :Content hereThis code would have a large space between the border and content:Content here
Why you need a code at microwave to reheat food?
A person doesn't often need to enter a code at a microwave if they want to reheat food. They simply program the microwave for how long they want the food to cook after they place the food inside.
What is a slash in Morse code?
Morse Code is sometimes written with a slash between letters to avoid getting the letters confused. A double slash means a space between words.
What does the Whirlpool stove F2 code indicate and how can it be resolved?
The Whirlpool stove F2 code indicates a problem with the oven temperature sensor. To resolve this issue, you can try resetting the stove by unplugging it for a few minutes and then plugging it back in. If the code persists, you may need to replace the oven temperature sensor.
What does the code -SE- on Kenmore Microwave 40180084700 mean?
error code on 401 80082700
What is the code of the space in the ASCII code?
32 is the ASCII Code for a space.
Why is there so much space between the search box and the answer?
Somthing is wrong in the code of the page.
What is the process for entering the PF code on a GE microwave?
To enter the PF code on a GE microwave, press the "Clear/Off" button to clear any previous settings, then enter the code using the number pad on the control panel.
