0
"In battery" indicates that a rifle is ready to fire, a round is in place and the hammer is cocked.
"Detonation out of battery" indicates that the round went off before it was supposed to.
It could have gone off in the magazine, as it was being chambered, or as the bolt closed.
In a revolver, it would mean that a chamber in the cylinder that wasn't lined up with the barrel discharged.
Revolvers and multi barrel pistols that are charged with black powder are noted for this.
Black powder is concussion sensitive and a chamber can detonate when the chamber next to it was discharged.
Putting the wrong ammo in a gun with a tube magazine can also cause this.
The primer can be touched off by the point of the round behind it causing all the rounds in the magazine to detonate.
What else can I help you with?
Which component of an IED creates an electrical charge?
The component of an IED that creates an electrical charge is typically a battery or power source. This electrical charge is used to initiate the explosive material or trigger the detonation mechanism of the IED.
Is the detonation of fireworks a physical or chemical change?
The actual detonation (a rapid oxidation reaction) is an example of a chemical change.The resulting blast of expanding gas, sound, and light; and the shredding of the casings are physical changes.
What is the symbol for a mass detonation hazard?
The symbol for a mass detonation hazard using the USAF system is an orange octagon with the #1 in the center. This differs from the other three fire symbols.
Is detonation of a physical or chemical change?
Detonation is primarily a chemical change that results in a rapid release of energy, typically in the form of heat, light, sound, and pressure. This process involves a rapid chemical reaction that leads to an explosive expansion of gases.
When an explosive detonates what determines the rate at which the explosive charge changes into a highly compressed gas?
The rate at which an explosive charge transforms into highly compressed gas during detonation is primarily determined by the explosive's chemical composition and structure, as well as the conditions of confinement and temperature. The speed of the reaction, known as the detonation velocity, is influenced by factors such as the type of explosive, its density, and the presence of additives or stabilizers. Additionally, the shock wave produced during detonation plays a crucial role in propagating the reaction through the unreacted material, further affecting the rate of gas generation.
What are some chemical reactions in the atomic bomb?
electrical battery chemistryconventional explosive detonation chemistry
What term is used to describe an incomplete detonation or complete detonation at lower than maximum velocity?
low order detonationlow order detonation
What terms is used to describe an incomplete detonation or complete detonation at a lower than maximum velocity?
An incomplete detonation is referred to as a "deflagration," while a complete detonation at a lower than maximum velocity is known as a "low-order detonation."
What term is used to describe an incomplete detonation or complete detonation at a lower that maximum velocity?
low order detonationlow order detonation
What term is used to describe an incomplete detonation or complete detonation at at lower than maximum velocity?
low order detonationlow order detonation
What term is used to describe an incomplete detonation or complete detonation at a lower?
The term used to describe an incomplete detonation is a "misfire," while a complete detonation at a lower velocity is known as a "deflagration."
When was Detonation - band - created?
Detonation - band - was created in 1997.
What term is used to describe an incomplete detonation or a complete detonation at a lower than maximum velocity?
low order detonationlow order detonation
What term is used to describe an incomplete detonation complete detonation at a lower than maximum velocity?
low order detonationlow order detonation
What term is used to describe a incomplete detonation or a complete detonation at a lower than maximum velocity?
low order detonationlow order detonation
What term is used to describe an incomplete detonation or complete detonation at a lowere than maximum velocity?
low order detonationlow order detonation
What term is used to describe an incomplete detonation or incomplete detonation at a lower than maximum velocity?
low order detonationlow order detonation
