0
What else can I help you with?
How fresh water was produced using evaporator?
In an evaporator, heat is applied to salt water causing it to evaporate. The vapor is then collected and condensed back into liquid form, resulting in fresh water that is separate from the salt. This process allows for the removal of impurities, producing clean drinking water.
If water is contained in a closed vessel having an absolute pressure of 0.15 psia such as in the evaporator area of the absorption generator the water will boil at what temperature?
The temperature is 7 oC.
Why is water coming out of evaporator tube?
Water coming out of the evaporator tube in a car's air conditioning system could be due to condensation from the cooling process. As the warm air passes over the evaporator coils, moisture in the air condenses and collects on the coils. This condensed water then drips down and exits through the evaporator tube to the outside of the vehicle.
How do you build solar water distiller?
To build a simple solar water distiller, you can use a container to collect water, a clear plastic sheet to cover the container, and a smaller container placed inside to catch the distilled water as it evaporates and condenses on the plastic. Place the setup in direct sunlight to heat the water and create condensation, which will then drip into the smaller container as clean, distilled water.
Which freeze faster fresh water or salt water?
Fresh water.
What is the function of evaporator in steam boiler?
An evaporator, distiller or distilling apparatus is a piece of ship's equipment used to produce fresh drinking water from sea water by distillation. As fresh water is bulky, may spoil in storage, and is an essential supply for any long voyage
What are 3 places were fresh water is found?
You can find usable fresh water anywhere water exists. Even the waters of the Dead Sea or the Great Salt Lake will yield fresh water if distilled, and the easiest way to do so is with a solar distiller. With a solar distiller, you can collect fresh water from a mud puddle.
Why vacuum is important on fresh water generator?
The purpose of the vacuum in the fresh water generator it can make a 50 degrees Celsius boil the water that's why they create a
How fresh water was produced using evaporator?
In an evaporator, heat is applied to salt water causing it to evaporate. The vapor is then collected and condensed back into liquid form, resulting in fresh water that is separate from the salt. This process allows for the removal of impurities, producing clean drinking water.
What is a water distiller?
A water distiller is used to produce high quality water through the process of distillation. Distilled water has many uses inside and outside of the home.
If water is contained in a closed vessel having an absolute pressure of 0.15 psia such as in the evaporator area of the absorption generator the water will boil at what temperature?
The temperature is 7 oC.
Can you drink distiller water?
Yes. It is very tasteless though.
Where can one purchase a water distiller?
One can purchase a water distiller from virtual stores such as Amazon or Wholesale Water Distillers. Another option would be to purchase it from any home improvement or builder's supply store.
What equipment found on board ship?
pumps compressors generators heatexchanger separator furefier boiler fresh water evaporator incinerator primemovers etc.....
How do you remove smell from carpet?
Reclean with fresh water. Dry and then try 48 hours service of commecial ozone generator.
Can humans drink distiller water?
Yes, but it is generally regarded as flat and tasteless.
What is the principle of fresh water generator?
The principle of a fresh water generator involves the distillation process, where seawater is heated to produce steam, which is then condensed to yield fresh water. This process typically utilizes waste heat from engines or boilers to evaporate the seawater, separating salt and impurities. The resulting steam is cooled in a condenser, leading to the formation of distilled water, which is collected for use. This method is efficient and widely employed in marine applications and arid regions for freshwater production.
