0
What else can I help you with?
If a copper wire in a working electric circuit is replaced by a piece of rubber tubing will there be a current in the circuit?
No, a rubber tubing is an insulator and will not allow the flow of electric current like a conductor such as copper wire would. Therefore, if the copper wire is replaced by rubber tubing, the circuit will be broken and no current will flow.
What arethe Uses of clay shield and rubber tubing?
The clay shield and rubber tubing are useful in heating during experiments. The rubber tubing connects the Bunsen burner to the gas outlet. The tubing enables the water to cool as it flows through the condenser during the distillation process.
What type of tubing can not be flared?
Non-metallic tubing like PVC, PEX, or rubber cannot be flared as they do not have the malleability required for the flaring process. Flaring is typically done on metal tubing such as copper or steel.
What are the safety precautions and techniques when inserting a glass tubing in a rubber stopper?
never attempt to insert glass tubing that has a jagged end, all glass tubing should be fire polished before its inserted into a rubber stopper. Use water or glycerin as a lubricant at the end of the glass tubing before inserting it into the rubber stopper. ask teacher for proper lubricant. Protect hands and fingers by wearing leather gloves or placing a folded cloth between your hands and the tubing. hold it as close as possible to the part it is inserted to the rubber stopper. always point the tubing away from the palm of your hand that holds the stopper. use a twisting motion and push the tubing into the stopper. At the end of the experiment put on leather gloves or place the folded cloth between your hands and the tubing and remover the stoppers from the tubing to keep them from sticking to the glass. if it wont budge, use lubricant.
Why rubber tubing attached to receiving flask?
Rubber tubing is attached to the receiving flask in order to create an airtight connection that allows the distillate to flow from the distillation apparatus into the receiving flask without escaping into the environment. This setup helps in effectively collecting and isolating the distilled liquid for further processing or analysis.
When should you remove the rubber tubing from the filter flask?
You should remove the rubber tubing from the filter flask after the filtration process is complete and there is no more liquid passing through the tubing.
If a copper wire in a working electric circuit is replaced by a piece of rubber tubing will there be a current in the circuit?
No, a rubber tubing is an insulator and will not allow the flow of electric current like a conductor such as copper wire would. Therefore, if the copper wire is replaced by rubber tubing, the circuit will be broken and no current will flow.
What is the function of regulator in the rubber tubing?
The function of a regulator in rubber tubing is to control the flow rate of gas or liquid passing through the tubing. It helps maintain a consistent pressure and flow rate for whatever substance is being transported through the tubing. This is important for applications where precise control of flow is necessary.
What arethe Uses of clay shield and rubber tubing?
The clay shield and rubber tubing are useful in heating during experiments. The rubber tubing connects the Bunsen burner to the gas outlet. The tubing enables the water to cool as it flows through the condenser during the distillation process.
Where can one purchase rubber tubing?
Rubber tubing can be purchased at hardware stores, online retailers, medical supply stores, and laboratory supply companies. They are available in various sizes and lengths to suit different needs. It is important to ensure that the rubber tubing meets the requirements for your specific application.
True or false foam rubber tubing is generally used as a conductor?
True
What type of tubing can not be flared?
Non-metallic tubing like PVC, PEX, or rubber cannot be flared as they do not have the malleability required for the flaring process. Flaring is typically done on metal tubing such as copper or steel.
If a copper wire in a working electric circuit is replaced by a piece of rubber tubing will there be a current in a circuit?
no rubber stops the flow of electricity
What is a sling shot made out of?
nowadays usually some metal plastic and rubber tubing
What is the name of the rubber gasket used with vinyl tubing for an airtight seal?
An O ring.
What are the safety precautions and techniques when inserting a glass tubing in a rubber stopper?
never attempt to insert glass tubing that has a jagged end, all glass tubing should be fire polished before its inserted into a rubber stopper. Use water or glycerin as a lubricant at the end of the glass tubing before inserting it into the rubber stopper. ask teacher for proper lubricant. Protect hands and fingers by wearing leather gloves or placing a folded cloth between your hands and the tubing. hold it as close as possible to the part it is inserted to the rubber stopper. always point the tubing away from the palm of your hand that holds the stopper. use a twisting motion and push the tubing into the stopper. At the end of the experiment put on leather gloves or place the folded cloth between your hands and the tubing and remover the stoppers from the tubing to keep them from sticking to the glass. if it wont budge, use lubricant.
Why should the end of the glass tubing be fire-polished?
Foremost for safety to prevent injury to users but also to alow smooth connection when using tubing of rubber stoppers
