answersLogoWhite

0

One possible substitute for anthrone reagent is sulfuric acid, which is commonly used to measure the total sugar content in samples. Sulfuric acid reacts with sugars to produce colored complexes that can be measured and quantified. Other substitutes may include phenol-sulfuric acid or dinitrosalicylic acid reagents, depending on the specific application.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

Why anthrone reagent needs to be kept cold before using?

Anthrone reagent is prepared in concentrated sulfuric acid. Adding reagents to acid causes immediate dissociation of the reagent and releases heat. If your solution weren't cold, it could generate enough heat to blow out of the flask or bottle.


How is anthrone reagent stored?

Anthrone reagent should be stored in a tightly sealed container away from direct sunlight and heat sources, at room temperature. It should also be kept away from incompatible substances and moisture, and monitored for any signs of degradation or contamination before use.


What is an Anthrone test?

The Anthrone test is a chemical test used to detect the presence of carbohydrates, specifically monosaccharides and disaccharides, in a sample. It involves adding Anthrone reagent to a sample, which produces a blue color in the presence of carbohydrates. The intensity of the blue color can be used to estimate the concentration of carbohydrates in the sample.


What is anthrone test for carbohydrates?

The anthrone test is a chemical test used to detect the presence of carbohydrates. When anthrone reagent is mixed with a carbohydrate sample and heated, it produces a blue-green color change in the presence of sugars. The intensity of the color change is proportional to the amount of sugar present in the sample.


What is the protocol for sugar estimation by anthrone method?

The protocol for sugar estimation by the anthrone method involves adding anthrone reagent to a sample containing sugar and heating it to develop a blue-green color. The intensity of the color is proportional to the sugar concentration, which can be measured spectrophotometrically at 620 nm. Calibration curves with known sugar concentrations are used to quantify the amount of sugar in the sample.

Related Questions

What is the procedure to prepare anthrone reagent?

To prepare anthrone reagent, dissolve 200 mg of anthrone in 100 ml of concentrated sulfuric acid. Mix the solution thoroughly and allow it to cool before use. Anthrone reagent is used for the detection of carbohydrates, specifically sugars, in various biological samples.


Why anthrone reagent needs to be kept cold before using?

Anthrone reagent is prepared in concentrated sulfuric acid. Adding reagents to acid causes immediate dissociation of the reagent and releases heat. If your solution weren't cold, it could generate enough heat to blow out of the flask or bottle.


Do glucose give a positive result for anthrone test?

Yes, glucose gives a positive result for the anthrone test. The anthrone reagent reacts with the carbohydrates present, including glucose, producing a blue-green color that can be detected spectrophotometrically.


How is anthrone reagent stored?

Anthrone reagent should be stored in a tightly sealed container away from direct sunlight and heat sources, at room temperature. It should also be kept away from incompatible substances and moisture, and monitored for any signs of degradation or contamination before use.


Substances which are ve to anthrone test?

The anthrone test, tests for carbohydrates. The positive indicator is glucose since glucose is one of the most common monosaccarides and is found in many polysaccarides. Anthrone tests positive for fructose, ribose, maltose, and sucrose.


What is an Anthrone test?

The Anthrone test is a chemical test used to detect the presence of carbohydrates, specifically monosaccharides and disaccharides, in a sample. It involves adding Anthrone reagent to a sample, which produces a blue color in the presence of carbohydrates. The intensity of the blue color can be used to estimate the concentration of carbohydrates in the sample.


What is anthrone test for carbohydrates?

The anthrone test is a chemical test used to detect the presence of carbohydrates. When anthrone reagent is mixed with a carbohydrate sample and heated, it produces a blue-green color change in the presence of sugars. The intensity of the color change is proportional to the amount of sugar present in the sample.


What is the protocol for sugar estimation by anthrone method?

The protocol for sugar estimation by the anthrone method involves adding anthrone reagent to a sample containing sugar and heating it to develop a blue-green color. The intensity of the color is proportional to the sugar concentration, which can be measured spectrophotometrically at 620 nm. Calibration curves with known sugar concentrations are used to quantify the amount of sugar in the sample.


What is the chemical basis of the Anthrone test?

The Anthrone test is based on the reaction between anthrone and carbohydrates, particularly simple sugars like glucose, to form a blue-green complex. The reaction occurs in acidic conditions and is commonly used to quantify the amount of sugars present in a sample.


Why antrone is used for estimation of carbohydrates?

why anthrone is used for estimation of carbohydrates?


What is a reagent strip?

The reagent strip is a strip of paper impregnated with a specific chemical reagent for a chemical determination.


Can you tell the concentration of protein in an anthrone test for carbohydrates without having the standard solution data and why?

i dont now