System config refers to the configuration settings and parameters of a computer system that dictate how hardware and software components interact. It includes settings related to networking, storage, display, security, and more. Modifying system config can affect the performance and behavior of the computer system.
wr or copy running-config startup config
In Desmume, you can typically customize the controls by going to "Config" and then selecting "Control Config." From there, you can map the various buttons to your preference using your keyboard or controller. The default controls usually include standard configurations for movement, actions, and menu navigation.
H- has the noble gas config. of He(helium). N3- has a electronic configuration of Ne(neon). Ni2+ doesn't have the stable config. of any noble gas.It's config. is [Ar]4s23d10.
gjfdgdf'gdfg
The running configuration on a router or switch is stored in the device's RAM (Random Access Memory) while it is running. It's a temporary configuration that is lost when the device is powered off or restarted. To view the running configuration, you can use the "show running-config" command in the device's CLI (Command Line Interface).
The command for launching the graphical package management tool in some Linux distributions is system-config-packages. However, this tool may not be installed by default and might not be available on all distributions. If you need to manage packages via the command line, consider using package managers like apt, yum, or dnf, depending on your distribution. To check if system-config-packages is installed, you can run which system-config-packages in the terminal.
System Software is the information needed to run the system. like config files and your O.S. (operating system).
Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/1Admin(config-if)#ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/1Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable secret cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248Router(config)# hostname AdminAdmin(config)# enable password cangetinAdmin(config)# interface fa0/0Admin(config-if)# ip address 192.168.1.22 255.255.255.248
HKEY Current config is a directory in the registry of a Windows operating system. It contains low level commands that are usually named after their API designations.
startup-config resides in NVRAM and running-config resides in RAM.
yes
Formerly know as the Network Administration Tool in RedHat, which was known as System-Config-Network due to it's command line invocation. Newer releases of RedHat uses the NetworkManager instead of Network Administration Tool.
R3#configure terminalR3(config)#access-list 104 permit ip 10.0.0.128 0.0.0.127 anyR3(config)#ip nat inside source list 104 interface Serial0/0/0 overloadR3(config)#interface fastEthernet0/1R3(config-if)#ip access-group 104 inR3(config-if)#ip nat insideR3(config-if)#exitR3(config)#interface Serial0/0/0R3(config-if)#ip nat outsideR3(config-if)#exitR3(config)#interface Serial0/0/1R3(config-if)#ip nat outsideR3(config-if)#endWriting by vanhuuvt32bonphuonglanha@gmail.com
Remove Console password router>enable router#configure terminal router(config)#line console 0 router(config-line)#no login router(config-line)#no password router(config-line)#exit router(config)#exit
miss config
Router(config)#Copy running-config startup-config
Here is a basic overview of the configuration of RIP on a Cisco router:Router(config)#router ripRouter(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0The 192.168.x.0 address can be changed to whatever address you would like to be broadcast over RIP. There are also other settings that can be configured.If you use RIPv2 you can also have the following configuration:Router(config)#router ripRouter(config-router)#version 2Router(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 192.168.3.0Router(config-router)#network 192.168.4.0Router(config-router)#network 192.168.5.0Router(config-router)#exitRouter(config)#exitRouter#%SYS-5-CONFIG_I: Configured from console by consoleRouter#copy running-config startup-configDestination filename [startup-config]?Building configuration...[OK]Router#