0
What is the CGS unit of current in the electromagnetic system equivalent to 10 amperes?
The centimetre-gram-second system (abbreviated CGS or cgs) is a metric system of physical units based on centimetre as the unit of length, gram as a unit of mass, and second as a unit of time. All CGS mechanical units are unambiguously derived from these three base units, but there are several different ways of extending the CGS system to cover electromagnetism.
CGS approach to electromagnetic units The conversion factors relating electromagnetic units in the CGS and SI systems are much more involved - so much so that formulas for physical laws of electromagnetism are adjusted depending on what system of units one uses. refer to link below for methods
What else can I help you with?
What units in metric system do you use to measure wave?
Waves have several measurable properties:Wavelength (λ): measured in micrometers, nanometers, or just meters.Speed or velocity: usually meters per second.Frequency: measured in Hertz, which is equivalent to (1 / seconds).Amplitude: depends on what type of wave. could be meters, if it is like a water wave, measuring the peak to trough distance, for example. Or volts or amperes for an electromagnetic wave.These are some of the quantities that can be measured for a wave.
How do you solve watts to amperes?
Amps = Watts/Volts, or Amps = Sq Root of Watts/Resistance.
What does 160kVA equate to in amps in a 3 phase system?
It doesn't 'equate' to current (amperes) because they are two quite different quantities. However, you can find out how much line current is flowing (for a balanced load only) if you divide the number of volt amperes by (1.732 x VL), where VL is the line voltage.
Watts equal to volt ampere?
In a direct current (DC) system, watts are equal to volt-amps. However, in an alternating current (AC) system, the relationship between watts and volt-amperes (VA) depends on the power factor of the system. The power factor is the cosine of the phase angle difference between the voltage and current waveforms.
How many amps equal to 1mva?
The number of amps in 1 MVA (megavolt-ampere) will depend on the voltage of the system. To calculate amperes, you can use the formula: Amperes = MVA / (sqrt(3) x kV), where kV is the voltage of the system in kilovolts.
Cgs unit of current in electromagnetic system equivalent to 10 amperes?
The cgs unit of current in electromagnetic system equivalent to 10 amperes is 10 amperes.
What unit is current measure in?
Electrical currents are measured in a unit called amperes, which are abbreviated as "amps." There are two different designations that measure currents: direct currents (DC) and alternating currents (AC). Amperes are coulombs per second. Amperes are electrical current units that are part of the meter-kilogram-second system. A flow of one coulomb per second is equivalent to one single ampere.
Which unit of electrical does the work in a circuit?
Current flow The answer you are looking for is Amperes or Amps. They are used to measure current flow and Amps do the actual work as they move electrons throughout the system.
What is the cgs unit of current electricity?
It seems there have been different "CGS" units, and the definition of units, specifically in the electrical area, varies between them. You would first have to decide WHICH cgs system you want to work with.
The ampere is the unit of electric current in the metric system The amount of current per second amperes per second is a?
A coulomb is the quantity of charge displaced by a one ampere per second.
If the current running through a wire is 1.2 amperes and it passed through a resistor of 7.5 Ohms what is the voltage of the system?
9V by using ohms law
What is the unit for current in physics?
Statcoulumb is the unit of charge in cgs system.
What is meaning of apparent power in transformer?
Apparent power is the product of voltage and current in an a.c. system, and is expressed in volt amperes. The rated apparent power of a transformer is the product of its rated secondary current and rated secondary voltage.
The cgs unit of current in the electromagnetic system?
There isn't one except by converting all the dimensions in the definition of an ampere into cgs units.
What does 200kA mean in electricy?
200kA in electricity refers to a current rating of 200,000 amperes. This measurement indicates the maximum amount of current that a circuit or electrical system can safely handle without causing damage. It is crucial for ensuring the safety and reliability of electrical equipment and preventing overloads or short circuits.
What resistance is necessary to operate a 3 amp device in a 12 volt system?
(R) Resistance = (E) Voltage / (I) Current in Amperes R = 12/3 R = 4 ohms
Why do scientists use ammeters?
Scientists use ammeters to measure the flow of electric current in a circuit. Ammeters are connected in series to the circuit and provide a precise measurement of current in amperes, helping scientists analyze how electricity is behaving within a system.
