answersLogoWhite

0

a tyre is made of the following components: .Rubber .Silican .Black carbon .Vulganising agents thanks

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

What replaced Carbon Black in rubber used to make tires and in what year did it appear in tires?

Silica is the newer agent used to make tire rubber, but Carbon Black is still used in the production of retread tires with very good results in improving mileage per tire. Carbon Black and silica are reinforcing agents mixed into the ingredients of tire base materials, such as natural and manufactured rubbers, to improve the characteristics of tires.


Why you reduce pressure in a car tire while moving on a motor way?

You should not reduce tire pressure just because you are going to be on a long roadway. You should set the pressure to the cold pressure as specified by the vehicle and tire manufacturers and you should leave it alone. It is normal for the pressure to increase when the tire is hot. DO NOT bleed it off. This will cause the tire to overheat and potentially cause it to fail, possibly with catastrophic consequences. Alwaysadjust pressure when the tire is cold.


What happens to tire air pressure when a car goes down the road at 70mph?

depends on the ambient temp. most tires will raise 3 to 6 psi during normal operating conditions. do not compensate and back your tires off for hot summers. start off with the cold recommended pressure and leave it. you only change with ambient changes maybe once a month or so.


What is the difference between tire balancing and tire alignment?

tire balancing is when the tire is spin balanced so it wont vibrate when you drive down the road.tire alignment isn't really aligning the tire as much as it is correcting the components of the front end so that the tires are straight up+down and side to side.when this is off it will cause premature wear of the tires.


What instrument measures tire pressure?

A tire pressure gauge is used to measure the air pressure inside a tire by pressing a nozzle onto the valve stem of the tire, providing a reading of the pressure level on a display. This helps ensure that the tire pressure is at the recommended level for safe driving and optimal tire performance.

Related Questions

Difference between used and retread tires?

A used tire is a tire that has been used on a vehicle before. Retread tires are different in that they have been used before, but then they went through a process that extends their life. Retread tires are kind of like "refurbished" tires.


What is a automotive recap?

A retread tire, but they've been banned everywhere just about for safety


How do you tell if a tire is a retread?

There is usually a seam on the tyre wall, sometimes it is not very noticable but if it is a retread it will be there. Also look out for partially obscured (brand name) writing. EG. Firestone with the top missing is a dead give-away.


How much does a Goodyear Wrangler tire cost?

A Goodyear Wrangler tire costs about $50 for most cars. That is the price new. If one can be found that is a retread then it is likely to be half that price.


What is the difference between a radial tire and a normal tire?

A radial tire is different from a normal tire in that a radial tires athatre built to last longer. The main difference is that radial tire have wires or cords that radiate at a 90-degree angle from the tire rim.


Why is your rear tire makes noise when you drive?

difficult to know what noise you are talking about, but could be a wheel bearing that has run dry and starts to "hum" when it gets hot. could possibly be that the tire is simply under inflated or if it's a retread, the tire could be coming apart which means get it checked right away.


What is the comfort and handling difference between a 205 tire and a 215 tire?

One size difference would hardly be noticeable to the average driver under normal conditions.


Are retread tires worth buying?

The decision of buying used or retread tires is ultimately up to you and only you. There are safety risks and the cost is reduced for this and less lifespan on the tire. If you are ok with the risk and reduced lifespan that is your judgement, however remember that you get what you pay for, and any injury or even death is going to cost you a lot more than a few bucks for tires.


Where is the spare tire located on the 2005 Chrysler town and country?

LOL It's NOT worth using. Underneath the van, between driver's and passengers seat. Hard for a normal size guy to crawl under there when it has a flat tire and is even lower to the ground then normal.


What is the normal tire pressure for a bicycle and why is it important to maintain it?

The normal tire pressure for a bicycle is typically between 30-50 psi (pounds per square inch), depending on the type of tire and rider preference. It is important to maintain the correct tire pressure because it affects the bike's performance, handling, and overall safety. Proper tire pressure ensures optimal traction, reduces the risk of flats, and improves the efficiency of pedaling.


What is the normal psi tire pressure for a 1998 corvette tire?

30 psi cold


What happens when you use an airpump to fill a tire?

That is the normal way to inflate any tire.