answersLogoWhite

0

There is no advantage of every appliance having its own circuit. The modern household has many appliances and to make a separate circuit for each one would be a waste of money. This is the reason that the electrical code requires split receptacles above the kitchen counters. On the average only one or two appliances would be operating at any one given time.

That said, the higher amp draw appliances have to have their own circuits. These types of appliances have an amp draw of close to what the circuit can produce. These types of circuits have breakers and wires sized to the amperage load draw of the appliance.


Examples of high amperage draw appliances are clothes dryer, oven, range, hot water tank, refrigerator, freezer, microwave oven, furnace and base board heating. All of the small hand appliances can share a circuit without overloading that particular circuit.

User Avatar

Wiki User

9y ago

What else can I help you with?

Continue Learning about Natural Sciences

What will happen to an appliance if the fuse rating is less than the current an appliance needed?

If the fuse rating is less than the current an appliance needs, the fuse will likely blow or burn out. This is because the fuse is designed to protect the appliance from overheating or catching fire by interrupting the circuit when the current exceeds the fuse rating. It is important to always use a fuse with a rating that matches the current requirements of the appliance.


Can you use a 32V 15A fuse if the appliance calls for a 125V 15A fuse?

No, you should not use a 32V 15A fuse in an appliance that requires a 125V 15A fuse. The voltage rating of the fuse is important for safety, and using a lower voltage fuse can result in the fuse not providing adequate protection and potentially causing a safety hazard. Always use the recommended fuse rating for your appliance.


What size of fuse is recommended to be fitted to an appliance with a rating of 1hp?

A 13 amp fuse is recommended for an appliance rated at 1hp. This will provide sufficient protection for the appliance and its components in case of a power surge or electrical fault.


Why is it dangerous to use the wrong fuse in an appliance?

it can shock you


This device will burn out before an appliance is ruined?

It is most likely referring to a fuse or a circuit breaker, which protects the appliance by shutting off power when there is a potential overload. This helps prevent damage to the appliance in the event of a power surge or other electrical issue.

Related Questions

What will happen to an appliance if the fuse rating is less than the current an appliance needed?

If the fuse rating is less than the current an appliance needs, the fuse will likely blow or burn out. This is because the fuse is designed to protect the appliance from overheating or catching fire by interrupting the circuit when the current exceeds the fuse rating. It is important to always use a fuse with a rating that matches the current requirements of the appliance.


How does a fuse wire save an appliance from high electric current?

A fuse link will melt and interrupt the flow of current to the appliance before it can get high enough to damage the appliance or wiring.


Can you use a 32V 15A fuse if the appliance calls for a 125V 15A fuse?

No, you should not use a 32V 15A fuse in an appliance that requires a 125V 15A fuse. The voltage rating of the fuse is important for safety, and using a lower voltage fuse can result in the fuse not providing adequate protection and potentially causing a safety hazard. Always use the recommended fuse rating for your appliance.


What are the uses FUSE?

They are a safety feature in the case of an energy surge - without the fuse damage could be dome to the appliance, with the fuse if their is a surge of electricity it burns out the fuse so can't travel all the way to the appliance damaging it.


What size of fuse is recommended to be fitted to an appliance with a rating of 1hp?

A 13 amp fuse is recommended for an appliance rated at 1hp. This will provide sufficient protection for the appliance and its components in case of a power surge or electrical fault.


Why is it dangerous to use the wrong fuse in an appliance?

it can shock you


Can a 13a fuse be used in a plug that takes a 3a fuse?

No, a 13A fuse should not be used in a plug designed for a 3A fuse. The purpose of the fuse is to protect the appliance and wiring from overheating and potential fire hazards; using a higher-rated fuse can lead to the appliance drawing more current than it is designed for, potentially causing damage or safety risks. Always use the correct fuse rating specified for the appliance to ensure safe operation.


A fuse should be conected between?

A fuse should be connected in the live wire, before reaching the appliance.


What is the function of the Maytag Centennial thermal fuse and how does it contribute to the overall operation of the appliance?

The Maytag Centennial thermal fuse is a safety device that protects the appliance from overheating. It shuts off the power to the appliance if the temperature gets too high, preventing damage or fire. This helps ensure the appliance operates safely and efficiently.


This device will burn out before an appliance is ruined?

It is most likely referring to a fuse or a circuit breaker, which protects the appliance by shutting off power when there is a potential overload. This helps prevent damage to the appliance in the event of a power surge or other electrical issue.


The fuse 13 A in a plug is intended to?

This is intended to protect the flex of a plug. A fuse is a little wire that all of the electricity coming into the appliance flows through. If something goes wrong and the current is higher than it should be, this fuse will overheat and burn out, thus breaking the wire and cutting the flow of electricity. If there was no fuse, the circuit would not be broken, this could overheat the plug and it could possibly catch fire. The 13A means that that fuse is set to 13 Amps of current, If it gets anything over that, the fuse will blow. Depending on the appliance the number will vary. 13A fuses are mostly used in the flexes of an appliance that have a high voltage, such as heating appliances like kettles fan heaters. When choosing a fuse for a plug you must choose a fuse that is higher than the current that the appliance has as current is higher when things are first switched on. If you choose a fuse that is too low for the appliance, the fuse will keep blowing out. Never choose a fuse that is too high for an appliance as this will not blow out if the current is too high.


What is the fuse rating of 600watt appliance on a 220 volt supply?

To calculate the fuse rating for a 600 watt appliance on a 220 volt supply, you can use the formula: Fuse rating = (Power/Voltage). In this case, it would be 600 watts / 220 volts, which equals approximately 2.73 amps. Therefore, you would need a 3 amp fuse for the 600 watt appliance on a 220 volt supply.