answersLogoWhite

0

green

User Avatar

Wiki User

12y ago

What else can I help you with?

Continue Learning about Natural Sciences

Can you use pipe unions in Natural gas lines?

Yes. But, only if the union is after a main shut off valve and is before and appliance connection. ex. A ball valve then pipe and a union before an furnace connection. Unions used as couplings to lengthen pipe are not code approved.


What is the code for natural gas lines?

The National Fuel Gas Code, also known as NFPA 54, provides guidelines for the installation, operation, and maintenance of natural gas lines. It covers aspects like pipe sizing, pressure regulation, and safety measures to ensure the proper installation of natural gas systems. Always consult with local authorities and professionals when working with natural gas lines to ensure compliance with applicable codes and regulations.


What is color code for natural gas pipe line?

The color code for natural gas pipelines is typically yellow. This color is used to indicate that caution should be taken in the area due to the presence of natural gas lines. It's important to always verify specific color codes with the relevant regulations or guidelines in your area.


What are plastic drain pipes of?

There is Black Iron pipe, made of iron. There is Cast Iron pipe, which is black in colour, made from old cars and their parts. There is black ABS plastic pipe, made of plastic. There is Utility pipe, also made from plastic.


Can water enter natural gas main lines?

No. It cannot enter because the lines are pressurised and any hole or crack in the line will exert more pressure outwards than the water can inwards. High pressure propane lines are self sealing because the gas is so cold upon leaving a crack, it will freeze to ice and be self sealing. Water can condense on the inside of a pipe just as any other surface and the gas companies have dryers to remove this moisture. Water can enter a natural gas distribution system (a pipe). Many older systems, particularly in the North Eastern US operate below 0.5 psig. If there is an opening in the pipe, water can overcome the operating pressure and enter the pipe.

Related Questions

What is the colour code in indian standards for pipe lines in automobile industry?

What is colour code for Poly vinyl acetate pipe line


What is the colour code for a liquid pipe line and a air pipe line?

reticulated system pipe line colour code


What should be the colour code for industrial pipe lines as per BIS 2973?

Which code do you use as OSHA / ASSE /AGA/ CDA / FS /CS / NIOSH all have their own "code"


What is colour code for Ammonia gas pipe line?

Yellow


What is colour code for medical oxygen pipe line?

green


What is the colour code for Grey water pump discharge pipe?

Blue


What is the colour code of liquid fied petroleum gas pipe line?

it is yellow with blue band


What is the Color code For LPG pipe line?

THE NORMAL CONDITIONS THE COLOUR OF lpg VAPOUR LINE IS GOLDEN YELLOW. BUT THERE IS MANY LINES FOR DIFRENT GASES YOU CAN CHANGE IT & COAD SAPERAT TO SIGN .


What is colour code of vacuum pipe line?

There are a few different color codes of vacuum pipe lines. Green means water, grey s steam, brown is oils, tan is gases, purple means acids, blue is air, black is other liquids and red means fire services.


What is the colour code of diesel pipe line as per NFPA standard?

As per Indian standard its Brown colour. -------------------------------------------------------------------------------- There is no specific code for coding pipelines in the US, different industrial plants use different color schemes. Gray pipe with a dashed red stripe painted every 6 feet, yellow pipe with a solid red stripe every 6 feet, solid orange pipe (solid red pipe is always fire protection systems according to NFPA rules), brown pipe with red or black stripes every 6 feet....and so on.


What is the color code for cold water pipe lines?

Light Green for COLD Water and Dark Green for HOT water


What is the international color code for pipeline and equipments of chemical industries in India?

what is the colour code for the following pipe lines used in semiconductor/electronic industries? 1.Silane. 2.Ammonia 3.Innert gases. 4.phosphine. 5.Diborane. As per Indian & international standards is requested. S.P.Krishnamurthy. reply to spkmurthy@inoxap.com