too. To indicates direction. I'm going to the bathroom. Too emphasizes something. Too thick, too fast, too big.
No, a 8/3 wire is suitable for hooking up an electric dryer. This wire size is typically used to handle the electrical load required by a dryer. Make sure to also use the correct outlet and breaker size rated for the wire.
Using a properly sized wire in a circuit is important because it ensures that the wire can handle the electrical load without overheating. A wire that is too small may overheat and cause a fire hazard, while a wire that is too large is simply wasteful and more expensive than necessary. Choosing the correct wire size also helps to maintain efficiency and safety in the electrical system.
No, it is not safe to use 10 gauge wire with a 30 amp breaker as the wire is not rated for that high of a current. It is important to use the correct wire gauge that matches the breaker amperage to prevent overheating and potential fire hazards. For a 30 amp breaker, you should use at least 10 gauge wire.
You can go either way. If you use stranded wire, you're pulling it through conduit. Stranded wire is more flexible, so it's easier to pull through the conduit. Solid wire stays bent once you bend it, and a stray wire won't jump out of a solid conductor and cause a short. Industrial wiring is a different story: all industrial wire is in conduit, so it's all stranded. Wiring with conduit is too expensive for residential applications, so they use Romex--which is always solid wire.
No, 14-2 wire is typically rated for 120 volts. For 230 volts, you would need to use a heavier gauge wire such as 10-2 or 12-2 to handle the higher voltage and current. It's important to always use the correct wire size for the voltage and current requirements to ensure safety and proper operation.
Thick copper cable-15mm
I remember you use to place a thick wire type triangle on top of the burner
"Better" depends on how much resistance you need for your circuit design.A short thick wire will have less resistance than a long thin wire of the same substance.Whether that's better or worse depends on how you plan to use the wire.
Yes, "not too" is correct to use when you want to imply moderation or limitations, such as "not too hot" or "not too far." It can help convey a sense of balance or constraint in your statement.
No, a 8/3 wire is suitable for hooking up an electric dryer. This wire size is typically used to handle the electrical load required by a dryer. Make sure to also use the correct outlet and breaker size rated for the wire.
When spelt "too" this means "as well".
lumps, pasty taste,too viscus too thick
A balance is the correct tool to use to find the mass of an object.
Yes. They're called suspension bridges. The Golden Gate Bridge outside San Francisco is one of them. The suspension cables are made out of wire. Very thick wire but wire non the less.
10-32 unf-2a <<>> The wire size does not need to be calculated. Use a wire terminal end that crimps to the wire. These terminal end come in various wire sizes and bolt hole sizes. Pick the correct end for the wire size you are using and then in that wire size range, pick the correct bolt hole size that fits the bolt.
guess so? i use it too.
Yes, "too" is the correct form to use with "late."