The cost of the bulb is in the 30 dollar range. The cost to replace it depends on the hourly rate of the person changing the lamp and the additional cost of a bucket truck to reach the light fixture. This price will vary throughout the country in which you live.
I have seen it both ways. Usually it is the bulb which is a few bucks. The ballast will cost more and could cost $15-$30 bucks depending on type. If you have another bulb that is working, swap it with the flicker light and see if the problem goes away. If the swapped bulb works, I always put the bad bulb in the fixture where the good bulb came from. If the bad bulb now works, you could have a seating problem with the bulb. If it flickers, replace it.
The cost of electricity for a light bulb being on for a long time depends on the wattage of the bulb, the electricity rate per kilowatt-hour, and the duration it is on. To calculate the cost, you can use the formula: (Wattage of bulb / 1000) * hours on * cost per kilowatt-hour.
The cost of a LED light bulb can vary depending on the brand, brightness, and design. On average, a basic LED light bulb can cost between $2 to $10. Specialty LED bulbs with advanced features may cost more.
about 2.00 dollars. it depends on the size and shape and the number of volts you get!
Yes, if it fits the socket and the light fitting, or lamp fixture, with its cover or shade. You will not be able to dim the compact fluorescent as you did the incandescent (unless you have a really fancy dimmer).
a buck for the bulb and 2-3 minutes of your time to replace it
the price of the bulb
mine costeD me 4633.56$
The cost of the bulb (or the light fixture, if you're replacing sealed beam headlights) if you do it yourself.
Remove screws on either end of light housing. Remove brake light. Remove bulb. Using a cloth, place new bulb in socket. Replace brake light. Attach screws. bulb cost approx. $2.00 for a two pack of bulbs, beats having the dealer do it and charge you an arm and a leg :)
A new Epson PowerLite bulb can cost about $350.
You will have more light but at a lower cost. They produce much less heat so that wouldn't be a problem.
I have seen it both ways. Usually it is the bulb which is a few bucks. The ballast will cost more and could cost $15-$30 bucks depending on type. If you have another bulb that is working, swap it with the flicker light and see if the problem goes away. If the swapped bulb works, I always put the bad bulb in the fixture where the good bulb came from. If the bad bulb now works, you could have a seating problem with the bulb. If it flickers, replace it.
i dont know ether if you get the answer can u send it to me plz
Drive it into your favorite oil change station and tell them your light is out. Within 15-minutes they'll do the work for you. Last time I needed a bulb changed it cost me about $10 for parts and labor.
The first commercially available light bulb cost $1 in 1881, which was three years after Thomas Edison developed the first practical incandescent light bulb. The Seattle Times reveals the $1 price in 1881 translates to $23 in 2013. By 1910, the cost of a light bulb dropped to 17 cents.
Thomas Edison's light bulb was patented in 1879. The cost of the original light bulb produced by Edison was around $1, which was quite expensive at that time.