the DICKNESS of the liquid
A definition doesn't exist for low density. The values depends on the application or material.
A definition of lower density doesn't exist. Solids with densities under 1,00 g/cm3have a very low density.
Some examples of density are the density of water, 1 g / 1 ml. Another example of density is the definition of density weight per unit volume. The density of the most dense element is Osmium at 22,570 kg / L.
The definition of density is mass divided by volume.
Temperature: Liquid water is densest at about 4 degrees Celsius. Heat it above or below that and it expands. State: Perhaps a sub-category of temperature, but gaseous water has a much lower density than either ice or liquid water. Pressure: A very small increase in density can be seen by pressurising liquid water, and a very great increase by compressing water vapour. Impurities: The presence of other particles, solvents or living matter in liquid water, ice or vapour has an effect on the sample's density (although this is not really an effect on the water's density by the strictest definition)
The English phrase 'specific gravity' means the ratio ofthe density of a substance to the density of water.
The density of anything is the ratio of the weight (really the mass) to the volume that the material occupies. Water was involved in the original definition of units of mass and volume, so it has a rather special value of density. To a good approximation, the density of water is 1 gram per milliliter.
Fresh water by definition is 1.0 and depending upon which salt water, typically 1.025
Yes. Nickel has a density of 8.912 gm/cm^3, while by definition the density of water (at 4C) is 1.0 gm/cm^3.
The definition of dinsity is wieght
Relative density, is also called specific gravity, and it is the ratio of the density (mass/volume) of a substance to the density of a particular reference substance, usually water. So, where density has the units of mass/volume, relative density (specific gravity) is unitless.
Because that's the man-made definition of "density".
A definition doesn't exist for low density. The values depends on the application or material.
A definition of lower density doesn't exist. Solids with densities under 1,00 g/cm3have a very low density.
The definition of density is: Density = (Mass) divided by (Volume).A simple algebraic operation rearranges this definition to give: Mass = (Density) times (Volume)
You can, but not clearly. Sound waves travel through water but lose much of their definition due to the density of the water. You would hear even less if you were in syrup.
Some examples of density are the density of water, 1 g / 1 ml. Another example of density is the definition of density weight per unit volume. The density of the most dense element is Osmium at 22,570 kg / L.