0
What else can I help you with?
What steps would you take to determine the density of a rubber eraser?
To determine the density of a rubber eraser, you would first measure the mass of the eraser using a scale. Next, measure the volume of the eraser by submerging it in a graduated cylinder filled with water and recording the water displacement. Finally, divide the mass of the eraser by its volume to calculate the density.
What unity of measurement is used for the density of eraser?
The density of an eraser is typically measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³). These measurements indicate the mass of the eraser per unit volume.
Why are your eraser shavings hot?
Friction between the eraser and the paper Your eraser shavings are hot because you rub the eraser back and forth inserting pressure. Just like if you rub your hands together. Your eraser shavings are hot because you rub the eraser back and forth inserting pressure. Just like if you rub your hands together.
What do you do when your eraser runs out?
When your eraser runs out, you can either replace the eraser with a new one or continue using the remaining usable portion of the eraser. If you don't have a spare eraser, you could use alternative methods like folding the corner of a clean piece of paper to create a makeshift eraser or using the end of a pencil.
If you pour different liquids into a graduated cylinder the liquids will form layers based upon differences in their?
densities. Liquids will arrange in order of decreasing density from bottom to top in the graduated cylinder. Liquids with higher density will sink to the bottom while those with lower density will float on top.
Why does an eraser sink?
An eraser sinks because it is denser than water. The density of an object determines whether it will float or sink in water. In the case of an eraser, its density is greater than that of water, so it sinks.
What steps would you take to determine the density of a rubber eraser?
To determine the density of a rubber eraser, you would first measure the mass of the eraser using a scale. Next, measure the volume of the eraser by submerging it in a graduated cylinder filled with water and recording the water displacement. Finally, divide the mass of the eraser by its volume to calculate the density.
What unity of measurement is used for the density of eraser?
The density of an eraser is typically measured in grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³). These measurements indicate the mass of the eraser per unit volume.
How do you melt a pencil top eraser?
Melting a pencil top eraser can release toxic fumes due to the chemicals in the eraser material. It is not recommended to melt a pencil top eraser, as it can be harmful to your health. If you need to reshape the eraser, consider using alternative methods like cutting or shaping with a knife.
Does an eraser float or sink in water?
An eraser typically sinks in water due to its density being higher than that of water.
Density of a eraser?
The density of an eraser can vary depending on the material it is made from, but typically falls in the range of 1 to 1.5 grams per cubic centimeter. This means that an eraser is relatively light compared to many other objects of similar size.
What is the relative density rubber eraser?
Oh, dude, the relative density of a rubber eraser is basically how much denser it is compared to water. So, if you drop a rubber eraser in water and it sinks, it's denser than water. If it floats, it's less dense. It's like a little science party in your pencil case, man.
What is the density of an eraser?
density=mass/volume therefore,.. d=20g/12 =3g/5 is the density hope it will help u guys.....
How do you construct a lever?
The simplest lever can be constructed with a ruler and an eraser. Place the ruler on top of the eraser and you have a lever. Many other objects can perform the same function
Why does a one inch eraser have more mass than a two inch feather?
A one-inch eraser typically has a higher density than a two-inch feather, meaning it has more mass packed into a smaller volume. While the feather is larger in size, it is made of lightweight materials and has a lower density, resulting in less mass overall. Therefore, despite the feather's greater length, the eraser's compact and dense composition gives it more mass.
What is the top of pencil called?
The top of a pencil is called an eraser. It is used to remove graphite marks from paper by rubbing it over the pencil strokes.
How long is a mechanical pencil eraser in inches?
A mechanical pencil or propelling pencil is a pencil with a replaceable and mechanically extendable pencil lead.The eraser is fitted on top of the pencil at the opposite end to the lead.The maximum length of the eraser would be no more than half an inch when new.
