1-0 or 1/0 actually means one zero and is thus pronounced "won aught". In the US, wire is sized per American Wire Gauge or AWG which gets larger as the gauge size gets smaller. 1 AWG wire is pretty big wire (about 1/4" in diameter). 1/0 or "0" AWG wire is a bit larger. By contrast, 4/0 (0000) AWG wire is about 1/2" in diameter). The larger the wire, the higher the current carrying capacity.
AWG, Ampere Rating, Some Uses
1, 130, Small House Service
0, 150, 40 HP Motor
0000, 230, Large House Service
The main difference between 10-2 and 10-3 wire is the number of conductors they have. 10-2 wire has two conductors, typically used for a hot wire and a neutral wire. 10-3 wire has three conductors, typically used for a hot wire, a neutral wire, and a ground wire.
When you multiply 10 by 85, you get 850. When you multiply 10 by 100, you get 1000. The difference between the two is 150.
Yes, 8 gauge wire is thicker and stronger than 10 gauge wire. The lower the gauge number, the thicker the wire is. Therefore, 8 gauge weld wire fencing would be stronger and more durable than 10 gauge wire fencing.
The time difference between Los Angeles, USA, and Romania is 10 hours. Romania is 10 hours ahead of Los Angeles.
It stands for American Wire Gauge and a designation like 10 AWG indicates the size. There are a number of other specifications which derive from the cross sectional area of the wire as designated by the gauge. One confusing aspect is as the number of the gauge gets smaller the current carrying capacity increases.
The main difference between 10-2 and 10-3 wire is the number of conductors they have. 10-2 wire has two conductors, typically used for a hot wire and a neutral wire. 10-3 wire has three conductors, typically used for a hot wire, a neutral wire, and a ground wire.
5
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
10 is a positive number, -15 is a negative number. Also... The difference is 25, -15 is 25 less than 10.
The difference between 12 and 2 is 10. This is calculated by subtracting 2 from 12, which results in 10. In mathematical terms, the formula for finding the difference between two numbers is to subtract the smaller number from the larger number.
The difference between 1 and 10 is 9. or When you add a zero to the right side of the number 1 it becomes 10.
The difference between the greatest and least number is the range. For example, if the greatest # in a set of data is 20, and the least # is 10, 20-10=10. 10 is the range.
The first number indicates the size of the wires, in this case #10 AWG (American Wire Gauge). The last number refers to the quantity of conductors, excluding the ground wire, if any. 10-2 wire would have two conductors, typically a black used for the hot, and a white used for the neutral. If the label says "10-2 with ground" then the cable would also contain a bare or green insulated ground wire. 10-3 wire contains all the above plus one more wire, typically red, used for an additional hot.
The Difference of math is when you subtract 2 numbers and get the number between it. Example: 30 -20 _____ 10 The difference there would be 10.
If N is the number, it is [abs(10 - N)]/3
13