Actually it can happen with a T.V but windows only takes 5v , not more and not less. A tv can take min 200 and max 220. So never give your windows more than 5v because it is an electronic device and TV is an electric device.
The voltage and frequency range depends on the individual appliance, but each appliance should have a small plaque on it near where the power cord enters, telling you the working range.
It is not recommended to connect a 240V ballast to a 208V line service as this can potentially damage the ballast and create a safety hazard. It is best to use a ballast that is specifically designed for use with a 208V line service to ensure safe and proper operation.
Its on the specifications of the device you will plug
If you mean - can you run a 220v device on 120v where the 220v device needs that level of voltage to operate correctly then the answer is no. Even disregarding the frequency difference which some devices aren't affected by, the voltage difference is too great. Some devices these days, such as phone chargers, laptop power supply units etc will run happily on a voltage range from 100v up to 240v (read the label first) but they are the exception. The question is somewhat ambiguous and needs more information.
Voltage is not an absolute figure. Voltage Difference is the exact term. So, the voltage difference between the two wires in the 220 V circuit will be 220V.
Actually it can happen with a T.V but windows only takes 5v , not more and not less. A tv can take min 200 and max 220. So never give your windows more than 5v because it is an electronic device and TV is an electric device.
no 208v is bigger
The voltage and frequency range depends on the individual appliance, but each appliance should have a small plaque on it near where the power cord enters, telling you the working range.
No.It'll overload and fail just about immediately.It's possible - but not recommended - to run two 110 v heaters in series from a 220v circuit.
Differ.
Nothing happens. The stereo has a transformer that converts the power to DC, and 50 or 60 Hz input makes no difference.
The main difference between a 220v and 240v electrical system is the voltage level. A 220v system typically refers to a split-phase system where the voltage is divided into two 110v legs, while a 240v system usually refers to a single-phase system with a higher voltage level. In practical terms, the difference is minimal and most appliances and devices can work interchangeably on both systems.
Probably nothing. There is a slight chance that it might make a difference but i doubt it. Problem is that it is very likely that this will make your warranty void. I would call the manufacturer and ask if I were you.
difference
difference
The noun forms of the verb to differ are difference and the gerund, differing.