Amp is the measure of electric charge per unit of time.
Horse power is the measure of the output of machinery, such as piston engines, turbines and electric motors.
The difference between 220 amps and 240 amps lies in their amperage ratings. 220 amps denotes a current capacity of 220 amperes, while 240 amps indicates a current capacity of 240 amperes. The higher the amperage, the greater the power capacity for electrical devices.
tes
One horsepower (hp) is approximately equal to 746 amps (A) in direct current (DC) systems. However, converting between amps and horsepower may require additional information such as voltage, efficiency, and power factor in alternating current (AC) systems.
1 HP = 746 watts. Watts = amps x volts. 7 x 110 = 770 watts. 770/746 = 1.032 HP
Horses are strong, amps have no strength at all unless they have volts riding along with them. The power of an amp is the current in amps times the voltage in volts. So 1 amp at 746 volts equals 746 watts, which is also one horse-power. The same wcould be achieved by 10 amps at 74.6 volts.
7 amps
You are thinking watts to horsepower, not amps to horsepower. Please restate the question.
The main difference between 5 amps and 10 amps is the amount of current flowing through a circuit. 10 amps is double the amount of current compared to 5 amps, which means a 10 amp circuit can handle twice as much power without overloading.
The difference between a hemi 265 and a hemi 245 is the horsepower. The 265 has a 218 @ 4,800 gross horsepower while the 245 has 165 @ 4,400 gross horsepower.
The difference between 220 amps and 240 amps lies in their amperage ratings. 220 amps denotes a current capacity of 220 amperes, while 240 amps indicates a current capacity of 240 amperes. The higher the amperage, the greater the power capacity for electrical devices.
tes
tes
Full load amps is the amperage at which the motor was designed to work at to achieve its rated horsepower. Service factor amps is the amount of a periodic overload at which a motor can operate without overload or damage. Continuous operation within the service factor amps will shorten the insulation and motor bearing life of the motor as the motor will be operating at a higher temperature than it was designed to.
25 horse power.
The length, and depending on horsepower, it could be larger for the higher horsepower bike.
One horsepower (hp) is approximately equal to 746 amps (A) in direct current (DC) systems. However, converting between amps and horsepower may require additional information such as voltage, efficiency, and power factor in alternating current (AC) systems.
for 1 hp we cnt say the amps why because hp will mention the speed in never will differ but comparatively amps (load) will differ dip pends upon the voltage (380,220,440)W = V * I / I = W / V