0
What else can I help you with?
What is the difference between extruded aluminum and powder coated aluminum and anodized aluminum?
Extruded aluminum is aluminum that is melted down and extruded, pushed through a certain 2d shaped hole. This can result in square tube, rectangular tube, an L shaped extrude, and an infinite array of other shapes. Powder coated aluminum is aluminum that could be extruded aluminum, that is cleaned, coated with a colored plastic powder, and then baked so that the plastic powder melts and forms a smooth, nice and even coat of colored plastic over the part. This is basically painting the part. Anodized aluminum is aluminum, again this could be extruded aluminum, but it couldn't be powder coated aluminum, that is put in a chemical solution, possibly sulfuric acid, and then a current is run through the aluminum. This causes a reaction to occur where a layer of aluminum oxide gathers on the surface of the part. The processes is then stop and the part can be colored if desired. Anodozing aluminum gives the part better corrosive resistance and makes the surface tougher and harder than it would have been if it had not been anodized. It does add thickness to the part which can be a downside, but it also is lighter than a powder coat if a paint job is desired.
Is zinc die cast nonferrous?
Yes, zinc die cast is nonferrous because it does not contain iron as a major component. Zinc die cast is made primarily from zinc, which is a nonferrous metal.
What happened to animals that eat aluminium?
they get poisond and die It depends on how much and how stiff the aluminum is. If they eat a little bit of aluminum foil, it will probably pass through with no harm done. If they swallow a chunk of an aluminum can or something similar, it could cause internal ruptures.
How does aluminium pollute the environment?
Organisms can't grow underneath an aluminum can. Animals can die if they swallow bits of a can. And I'm assuming the paints on the can are somewhat toxic.
Why do you die inside a black hole?
In fact you would die outside a black hole. At least in the case of a stellar-mass black hole, the tidal forces, i.e. difference in gravity between your head and your feet, would be strong enough to tear you apart before you reach the event horizon.
What is the difference between pure aluminum and die cast aluminum?
Die cast aluminum products are usually actually made of aluminum alloys. Depending on the characteristics required of the products these alloys will contain any of a number of substances in varying amounts. Typical of these are silicon, iron, manganese, magnesium, nickel, zinc and tin. Please see the link for one manufacturer's offerings. Google for others.
What is the difference between aluminum extruded bar and aluminum bar?
The extruded bar would be produced by pushing molten aluminum through a die. Where as the other option for making the bar would be to cast it in a mould. The extruded bar would probably have smoother sides and would be available in longer lengths.
Can you recycle die-cast aluminum?
It is a non ferrous metal. It has high dimensional stability for complex shapes and thin walls so it is a main benefit of aluminum die casting that it is recyclable.
What is cast aluminum?
What is Cast Aluminum?Cast aluminum is a very broad term because there are several manufacturing types to casting such as sand casting, investment casting, gravity casting and high pressure die casting. Aluminum produced as castings comes in many alloys.How does hard water effect the cast aluminum heat exchanger in a boiler?Hard water can produce an oxide in an aluminum heat exchanger. Depending on the aluminum alloy and how much iron is in the alloy, there could be corrosion. Some aluminum alloys such as A413 and A360 would work better as a die casting.Which is a better heat exchanger for residential use, cast aluminum or stainless steel?As a heat exchanger, aluminum could work better than steel because of the temp transfer abilities over steel. Stainless steel will not corrode.
What is the difference between charismatic and transformational leadership?
go die
Why is aluminum used to maka a carburetor?
It is easily die cast and machined, an economical way to manufacture carbs in automotive industry quantities.
What is the melting point of die cast?
The melting point of die cast materials typically ranges from 121 to 660 degrees Celsius, depending on the specific alloy used in the casting process. Common die casting materials include aluminum, zinc, and magnesium alloys, each with its own unique melting point.
What the difference between Jesus and a friend?
There is a big difference, Jesus is ageless, friends die, Jesus loves and came to save you from your sin.Friends can not and may not die for you.
What is the difference between tool and die?
the tool is a divice which are fit to the die and get the final shape which are requred of the component
What is the difference between a Round Die and a Hexagonal Die?
i don't know... their different shapes... why even ask?
There is difference between letting die and killing?
If we kill, we intend the death. If we let die, the death is foreseen, but not intended.
Can anyone die from smoking out of aluminum foil?
No
