0
cooling towers usally just release steam, due to the fact that product (air, water, oil, etc...) travels through some kind of piping or duct work with water or air passing around or across it inturn cooling the product where as polluntant chimneys, are exits for exhaust emmissions from things like dust collectors or large kilns or furnances where particles from the product being made is heated or cooked,and all of the particles cannot be contained.
What else can I help you with?
Does the difference in the temperature at the start between the liquid and its surrounding temperature affect the rate of cooling?
Yes, the difference in temperature between the liquid and its surroundings affects the rate of cooling. A larger temperature difference typically results in a faster rate of heat transfer, as described by Newton's Law of Cooling. The greater the thermal gradient, the more efficiently heat is exchanged, leading to quicker cooling of the liquid. Conversely, a smaller temperature difference will slow the cooling process.
What is the difference between metaporphic and igneos rock?
The difference between metaporphic and ignous rock are that ignous rock is formed by cooling of magma and metaporphic is formed by temperature and pressure changes inside the earth
What is the reason for cooling of lava on earth's surface?
1) The temperature difference between the lava an its surroundings. 2) At the surface heat can be radiated away
What is a cooling combustion?
Cooling combustion refers to a combustion process where heat is removed from the combustion zone to lower the temperature. This can be achieved through the injection of a coolant or by designing the combustion chamber in a way that dissipates heat more efficiently. Cooling combustion can help reduce emissions of pollutants and increase fuel efficiency in engines.
What is cooling rate and how is it measured?
Cooling rate refers to the speed at which a material loses heat during the cooling process. It can be measured by monitoring the temperature of the material over time using a thermometer or sensors. The cooling rate is influenced by factors such as the material's thermal conductivity, its surface area exposed to the surrounding environment, and the temperature difference between the material and its surroundings.
What is the difference between a heatsink and water cooling?
Heatsink uses what they call passive cooling where as liquid cooling systems use active cooling.
What is the difference between a heating curve and a cooling curve?
heating curve is hotter than the cooling curve
What is the difference between nominal and rated cooling capacity of air conditioner?
What is the difference between rated capacity and the nominal capacity
Does the difference in the temperature at the start between the liquid and its surrounding temperature affect the rate of cooling?
Yes, the difference in temperature between the liquid and its surroundings affects the rate of cooling. A larger temperature difference typically results in a faster rate of heat transfer, as described by Newton's Law of Cooling. The greater the thermal gradient, the more efficiently heat is exchanged, leading to quicker cooling of the liquid. Conversely, a smaller temperature difference will slow the cooling process.
Can cooling effect in houses be done by stone cladding?
it can be done with thermal chimneys and double wall with air inside
How do you tell difference between radiator leak or hose leak?
pressure test the cooling system
Newton's law of cooling applies to objects that are?
Newton's law of cooling applies to objects that are both heating and cooling. Newton's Law of Cooling states that the rate of change of the temperature of an object is proportional to the difference between its own temperature and the temperature of its surroundings.
What are the factors that the cooling constant depend on?
The cooling constant depends on factors such as the material properties of the cooling medium, the surface area available for heat transfer, the temperature difference between the object and the surrounding medium, and the efficiency of the cooling system in removing heat.
What is the difference between metaporphic and igneos rock?
The difference between metaporphic and ignous rock are that ignous rock is formed by cooling of magma and metaporphic is formed by temperature and pressure changes inside the earth
What cools faster fresh water or salt water?
The rapidity of cooling depends on the temperature difference between the two materials.
What is range in cooling tower?
Range is the difference of cooling water inlet and cooling water outlet temp
What temperature difference should be expected between the indoor line and the permanent suction -line ports on the reversing valve during the cooling cycle?
During the cooling cycle, a temperature difference of around 18-20°F is expected between the indoor suction line and the permanent suction line ports on the reversing valve. This temperature difference indicates proper operation of the system.
