Actually there's no main chemical difference
Just the reaction rate is higher with concentrated one
Magnesium ribbon is rubbed with sandpaper to remove its oxide layer, which can impede its reactivity. The oxide layer forms quickly when magnesium is exposed to air, and this layer can prevent the magnesium from reacting effectively in chemical reactions, such as combustion. By sanding the ribbon, the fresh, reactive magnesium surface is exposed, allowing for better ignition and more vigorous reactions.
Hydrochloric acid is very natural, since that is the kind of acid that is in our stomachs.Muriatic acid is a very old name, from the middle age, now obsolete. The correct systematic name is hydrogen chloride. Another synonym is hydrochloric acid. In nature the hydrogen chloride is a component of volcano gases and of...gastric acids.
Yes, magnesium is more reactive than argon. Magnesium is an alkaline earth metal that readily reacts with water and acids, while argon is a noble gas that is chemically inert and does not readily form compounds. This fundamental difference in reactivity is due to magnesium's tendency to lose electrons and form positive ions, whereas argon has a complete valence shell and does not engage in chemical reactions.
The impurities found on the surface of magnesium in the formula of magnesium oxide are often magnesium hydroxide and magnesium carbonate. These impurities can form due to exposure to air and moisture, which leads to reactions with carbon dioxide and water in the environment.
According to the chemist I spoke to at Flinn supply company, a magnesium turning is a small, thin, curled piece of magnesium, like you would get if you were shaving small strips of wood off of a bigger piece.
Yes, concentrated hydrochloric acid can be used for alcohol dehydration reactions. It can act as a dehydrating agent by removing water molecules from alcohols, leading to the formation of alkene products. However, caution must be taken when working with concentrated hydrochloric acid due to its corrosive nature and potential hazards.
Dilution of hydrochloric acid decreases its concentration, which can affect its properties and reactivity. When hydrochloric acid is diluted, it becomes less corrosive and less reactive compared to concentrated hydrochloric acid. This means that diluted hydrochloric acid may not be as effective in certain chemical reactions or in dissolving certain materials.
When magnesium reacts with hydrochloric acid, it produces magnesium chloride and hydrogen gas. With sulfuric acid, it forms magnesium sulfate and hydrogen gas. When magnesium reacts with water, it forms magnesium hydroxide and hydrogen gas.
Well if you put magnesium with hydrochloric acid, the magnesium reacts with it and creates hydrogen and magnesium chloride. Here is the word equation... Magnesium + Hydrochloric acid --> Magnesium chloride + Hydrogen
Magnesium is more reactive than lead, copper, silver, zinc, and iron because it has a higher tendency to lose electrons and form magnesium ions. When magnesium reacts with hydrochloric acid, it displaces hydrogen from the acid to form magnesium chloride and hydrogen gas. This reaction is more vigorous compared to the reactions of the other metals mentioned.
lipids
Coned HCl is likely a typo for concentrated hydrochloric acid (HCl). Concentrated HCl is a strong acid commonly used in laboratories and industry for various chemical reactions and applications. It is corrosive and should be handled with care due to its ability to cause burns on contact with skin or tissue.
No, hexaaminecobalt(III) chloride does not react with concentrated hydrochloric acid (HCl) due to the stability of the complex and the lack of available sites for the acid to attack. The hexaaminecobalt(III) complex is inert and does not readily undergo substitution reactions with halide ions.
Concentrated HCl is hydrochloric acid with a concentration that is close to the maximum amount of this acid that can be dissolved in water. In general, it is considered to be approximately 12M, which is 12 moles of acid per L of solution, however 38-40% acid solution of concentrated HCl do exceed 12M (up to 12.6M). I am not sure of what happens if you try to make a solution of HCl that is more concentrated. In any case, you should always read the label on the bottle and consider the age of the mixture as pure HCl is a gas and will evapourate, which will lower the concentration.
Yes they do.
Metals like magnesium, zinc, iron, and aluminum react with dilute hydrochloric acid to produce hydrogen gas and a metal chloride salt. These reactions are examples of single displacement reactions, where the more reactive metal displaces the hydrogen from the acid.
Oxidation-reduction, as magnesium is oxidized in this reaction