Amperage, or current, is a measure of the amount of electrons moving in a circuit.
Voltage is a measure of how much force those electrons are under.
In a circuit, say a light and switch in your home when the light is on there there is a voltage across the filament of the bulb that is pushing amperage through the circuit.
When the switch is off there is voltage across the switch but there is no current flowing because it is "blocked" by the switch.
An analogy that normally helps to illustrate the difference between voltage and amperage:
you have a garden hose, the nozzle is closed. You've got pressure but no flow-voltage but no current (amperage). Open the nozzle and the pressure in the hose causes the water to flow - turn on the light and the voltage causes the current to flow (amperage)
Answer (in understandable terms)Voltage is how much electricity there is.Amperage is how fast that electricity is moving (if at all).
There are other things involved in electricity, electrical currents, etc., but this question is about amperage ("amps") and voltage ("volts").
Here's a good analogy. Imagine you have a bucket and a regular watering hose. The hose is connected to a spigot, or spout(which is the thing where you turn the water on and off by twisting the little handle), but the water is 'turned off' at the moment. And although it is 'off,' it could easily be turned back 'on' by twisting the handle and allowing the water to flow out. Also, the more you twist, the more water comes out.
Don't worry -- this will all tie together. :)
If there was no spigot then water would be flowing out all over the place, all the time (until there was no more water), because there'd be no resistance to block it from flowing. That being said, when you're done using a hose and you go to 'shut the water off' (by tightening the handle on the spigot), what you're actually doing is forcing the water to stop flowing because when the handle gets tighter, on the other end of the handle is a little piece of metal that gets forced into the pathway of the water-flow, which in turn restricts how much water can come out; if you tighten the handle all the way, the little metal thing will be completely blocking any water from flowing out -- when the water stops coming out, you've officially 'shut the water off.'
Likewise, if you want to fill your bucket up with water, you'll need to turn the water on, which you accomplish by twisting the handle in the other direction. This, in turn, moves the metal thing away from blocking the water, resulting in a flow (of water) into the hose. Now, you can use the hose to point the water so that it flows into the bucket. And, the more you loosen the handle on the spigot, the more water comes out at once.
This is basically the how amperage & voltage work. Like it says above, voltage is how much -- amperage is how fast. And again, if there was no 'spigot-metal-thingy-blocker' to get in the way, water would be flowing out everywhere; and if you shut the water off, using the 'thingy-blocker,' water stops flowing. Either way, regardless of whether the water is on or off, 'how much' water there is sitting on the other side of the spigot doesn't change(unless you forget to pay the water bill). The same is true for voltage -- the number of volts doesn't change.
What does change is the "rate of flow" -- aka "how fast it's flowing." Amperage can be defined as exactly that: the rate of flow (or current). You can have all the water ('voltage') in the world but if it's not flowing (because the spigot is shut off), and therefore the rate of flow ('amperage') is 'zero,' you'll NEVER fill your bucket (Try it! Put a hose in an empty bucket, and don't turn the water on -- I'll bet you'll find that the bucket stays pretty dry). :)
Ultimately, to sum up, you can think of it like this:
Now (if you haven't fallen asleep already), maybe (hopefully) you can figure out / understand why & how it is that a smoke detector uses a 9-volt battery, while a car uses a 12-volt battery (not much difference), and-- well, you get the point.
Answerthink of it this way...There is a water source like a lake, the lake flows into a river, and there is a dam at some portion of the river and then there is at the end of the line the ocean.
The lake is the source or (Service Connection 120/240) The river is the current (amperage) the dam is the (switch), and the boulders, ravines, and sandbars are restrictions of the flow of water which is (Ohms -Resistance)the ocean is then the end of the line.
another answer for the mechanically minded
this is not exactly a true representation and can be construed as the wrong forces in motion but for a releationship diagram it depicts the hierarchy and extent each principal has on each other.
in a internal combustion engined car
voltage is like horsepower in a car this is all the energy available to do work
amperage is the accelerator... how much power that can flow at a given moment
gearbox is like a transformer.
The relationship between amperage and capacitance is indirect. Capacitance stores and releases electrical energy, affecting the flow of current in a circuit. Higher capacitance can lead to slower changes in current (i.e., lower frequency), while lower capacitance can result in faster changes in current.
Voltage is equal to amperage time resistance. V=IR Therefore, I'd say voltage times amperage is equal to amperage squared times resistance. VI=IIR Really there's no point in multiplying the two. However, if you were to divide voltage by amperage, you would have the resistance of the circuit. V/I=R
The formula to calculate the amperage of a ring in magnetic particle testing is Amperage = Voltage / Resistance, where Voltage is the potential difference across the ring and Resistance is the total resistance of the ring. The amperage determines the magnetic field strength generated by the ring to magnetize the test specimen for detecting any discontinuities.
Not necessarily. Amperage (current) is just one component of electrical power. Power is the product of voltage and current. To calculate power, you need both voltage and amperage.
You can calculate amperage (A) using the formula A = W / V, where W is the power in watts and V is the voltage. Simply divide the power in watts by the voltage to find the amperage.
This doesn't make sense, "current" is "amperage" so the higher the voltage the lower the amperage, and the lower the voltage the higher the amperage.
no difference...
No. Amperage is the current flowing down the conductor as voltage is a constant (relatively). As an example- a 120 volt light bulb is of course 120 volts but if it is 60 watts then it will draw .5 amps. a 100 watt bulb will draw around .8 ampsDifferent things.
Working Voltage is the voltage at which the boot is safe at. Test Proof voltage is what the boot was tested up to before it failed. However you must keep in mind that if you are in wet conditions that can significantly lower the rating of the boot. Also voltage does not kill you it is the amperage.
The relationship between amperage and capacitance is indirect. Capacitance stores and releases electrical energy, affecting the flow of current in a circuit. Higher capacitance can lead to slower changes in current (i.e., lower frequency), while lower capacitance can result in faster changes in current.
Voltage is power Amperage is current. you can have voltage but nothing runs without a closed circuit and then current flows.
it depends on what type of load. Motor amperage will drop off as voltage rises. loads such as lights will increase amperage with voltage rise.
Depends on the voltage and amperage of the battery vs. the voltage and amperage required of the bicycle.
The standard voltage of a wall outlet is 120 volts, and the standard amperage is 15 amps.
the difference between a voltage converter to a voltage regulator,is that a voltage converter,converts or changing the desired voltage to be used while the voltage regulator,regulates the input of the voltage amount not to excess to its inputs.
Voltage at a point is defined as the work done by a unit positive charge carrying it from infinity to that point. while volage diffrance between two points is the work done bye unit positive charge from one point to the other point.work may be positive or negative depend upon the nature of charge that's why the potential will be negative or positive .CommentBy definition, voltage means potential difference. For this reason, you cannot have 'a voltage at a point' because potential difference, or voltage, exists between two points. You can, however, have a potential at a point.
Voltage is equal to amperage time resistance. V=IR Therefore, I'd say voltage times amperage is equal to amperage squared times resistance. VI=IIR Really there's no point in multiplying the two. However, if you were to divide voltage by amperage, you would have the resistance of the circuit. V/I=R