answersLogoWhite

0

Unplug it. After that, you can put it out pretty pretty much any old how you like.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Natural Sciences

If you plug an electric toaster rated at 110-v into a 220-v outlet what will the outlet current in the toaster be?

It doesnt matter you will smoke it. The current in a resistive circuit is proportional to the voltage. If the voltage doubles and the resistance is the same (elements) the current will double and burn up both the elements and the toaster wiring. Look up "ohms law" for current voltage and resistance effects. Don't try it..


Can you add a 20 amp breaker if therE is room?

You should add only with a proper load calculation. You should probably have a licensed electrician look at the situation first. You can find a licensed electrical contractor at www.contraxtor.com to help with your electrical service upgrade


Who discovered that electrical currents do not need electrical wire to flow through?

The first person to get killed by a lightning strike.


Can regular PVC glue be used on electrical conduit?

No, regular PVC glue should not be used on electrical conduit. It's important to use a solvent specifically designed for electrical conduit to ensure a secure and safe connection. Using the wrong type of glue can compromise the integrity of the conduit and pose a safety hazard.


What electrical safety procedure is described below If you are going to work on something electrical you should first disconnect it completely from its electrical source Then you have to make sure tha?

Lock Out, Tag Out This is the process of disconnecting the power supply, locking it so no one can turn it back on and tagging the lock so people know why it is locked out and who locked it. It is against the law in some states and OSHA for someone else to unlock it.

Related Questions

Whot is the inventor of apliances?

The inventor of the first electrical appliance was Albert Marsh who invented the toaster.


Describe the energy transfers that happen in a toaster?

In a toaster, electrical energy from the power source is converted to thermal energy through the heating elements. The thermal energy then transfers to the bread slices, causing them to heat up and toast.


What should you do if you get a bagel stuck in your toaster?

If you have a bagel stuck in your toaster, you must first pull the plug of the toaster to shut it down. Then you can proceed with the removal of the bagel. Try using a butter knife to hook the bagel out.


Where was the first toaster sold?

the first toaster was sold at a mechanic plant in Stillwater.


How do you get toast out of a toaster if its stuck?

First turn off the toaster and unplug it. Then let the toaster cool down. Once it is cool take the toster outside and turn it upside down and shake it. The toast should fall out.


What was the first toaster?

the first toaster(your mom)was invented in (your mom) and is seeable in Washington (your mom) d.c.


What are the energy transformations in a toaster?

First, a toaster uses electrical energy. Then, it uses this electrical energy and the mechanical energy of you pushing on the lever to produce thermal energy, or heat, and sound as the object in the toaster pops up.


If your car catches on fire while driving the first thing you should do is .?

Pull over


Who invented the household appliance we call a toaster?

the first toaster was made by my teachers great great great great grandpa


What energy transformation to oven toaster?

Energy transformations occur in the process of toasting a bagel in an electric toaster. First, since you plug a wire into an electrical outlet, you are using electrical energy. Then, the bagel gets hot, so there is thermal energy involved. I know this answer is right because this EXACT question was on my physics test and I got it right! you forgot radiant energy because the toaster becomes red and gives of light. i had this question on my homework. lol i have that same question in my homework right nao.


Which wire should you connect first to prevent electrical shock?

To prevent electrical shock, you should connect the ground wire first.


When was the first toaster made and by who?

the first toaster was made in 1300 B.C by a villager by the name of De shoklet in England