You did not say what type of alcohol, Most common types are isopropyl (rubbing alcohol) methanol (used in shellac) and ethanol (beer, wine, whiskey) An ethanol-water solution that contains 40% ABV (alcohol by volume) will catch fire if heated to about26 °C (79 °F) and if an ignition source is applied to it. This is called its flash point. The flash point of pure ethanol is 16.60 °C (61.88 °F), less than average room temperature.
The flash point of isoamyl alcohol (also known as 3-methyl-1-butanol) is approximately 34 °C (93 °F). This is the temperature at which the vapor of the substance can ignite in the presence of an open flame or spark. It is important to handle isoamyl alcohol with care, as it is flammable and poses fire hazards at or above this temperature.
Flash point of min. 60 °C (140 °F).
The flash point of asphalt is over 200 oC.
Refer to the related link for a Wikipedia article on flash point.
The flash point of kerosenes is between 35 0C and 65 0C. The autoignition point of kerosenes is 220 0C.
it should be somewhere around 20 deg centigrade. as 20% alcohol has flash point of 28-30 deg c and whiskey has alcohol 42.8%. sandeep
The flash point is 30 oC-50oCThe melting point is -50 oC to -60 oC.
Flashpoint would be approximately 36° C
You did not say what type of alcohol, Most common types are isopropyl (rubbing alcohol) methanol (used in shellac) and ethanol (beer, wine, whiskey) An ethanol-water solution that contains 40% ABV (alcohol by volume) will catch fire if heated to about26 °C (79 °F) and if an ignition source is applied to it. This is called its flash point. The flash point of pure ethanol is 16.60 °C (61.88 °F), less than average room temperature.
The flash point of grape brandy at 40% alcohol content is typically around 63-73 degrees Fahrenheit (17-23 degrees Celsius). This is the temperature at which the vapors from the brandy can ignite when exposed to an open flame or spark.
The flash point of crude oil can vary depending on its composition, but typically ranges from around 35°C to 150°C. Flash point is the temperature at which a volatile substance can ignite when exposed to an ignition source. It is an important safety consideration for handling and transporting crude oil.
No, it is not safe to microwave alcohol for cooking or heating purposes as it can create a fire hazard due to its low flash point.
What is the flash point of 1/2" osb
Flash point of min. 60 °C (140 °F).
Yes, benzyl alcohol is flammable. It has a flash point of 145°F and can ignite if exposed to an open flame, spark, or heat source. It is important to handle benzyl alcohol with caution and store it away from sources of ignition.
What is the flash point of 1/2" osb