The largest 2 pole breaker typically available for residential use is a 200 amp breaker. This breaker is commonly used for main electrical panels to provide power to the entire home.
The term "double pole" usually means a breaker with 2 handles that attaches in the space as a normal single pole breaker. If this is what you mean, no, you cannot. There is no potential, or voltage, between the wire terminals. If by "double pole" you mean what is usually called a 2-pole breaker, which is a breaker with 2 handles that attaches in the space of 2 single pole breakers, then yes, you can use this breaker and 12/2 wire to produce a 220v circuit.
A pole In a circut breaker refers to the number of circuts it controls, single pole only controls one, double controls 2 at same time
Yes, a 2 pole 60 amp ITE Gould or Westinghouse breaker can replace a 2 pole 60 amp T and B unit as long as they have the same voltage rating and fit properly in the panel. It is important to make sure that the replacement breaker is compatible with your specific panel model.
No, a 2 pole breaker is designed for a 240-volt circuit or for two separate 120-volt circuits that are out of phase with each other. For a 120-volt single-phase circuit, you would typically use a single-pole breaker.
No, it is not recommended to connect a 2 pole load to 2 single pole breakers as this can cause issues with proper circuit protection and may lead to electrical hazards. It is best to use a dedicated 2-pole breaker for a 2 pole load to ensure proper operation and safety.
The maximum current rating of a 2 pole 25 amp breaker is 25 amps.
The maximum current rating of a 2 pole 60 amp breaker is 60 amps.
6000amps <<>> The above answer must have big lugs to accommodate 6000 amp capacity wire. In my breaker catalogue the largest 120 volt single pole breaker is 70 amps, 277 volt single pole is 150 amps and 347 volt single pole is 100 amps. The 120 volt single pole breaker occupies two opposed slots because of its length.
The maximum current rating for a 2 pole breaker that can handle 25 amps is 25 amps.
A pole In a circut breaker refers to the number of circuts it controls, single pole only controls one, double controls 2 at same time
The term "double pole" usually means a breaker with 2 handles that attaches in the space as a normal single pole breaker. If this is what you mean, no, you cannot. There is no potential, or voltage, between the wire terminals. If by "double pole" you mean what is usually called a 2-pole breaker, which is a breaker with 2 handles that attaches in the space of 2 single pole breakers, then yes, you can use this breaker and 12/2 wire to produce a 220v circuit.
can a 20 amp double pole circuit breaker be used for 2 different 120 v circuits using 14 - 2 wire
AWG 12/2 requires the use of a 20 amp single pole breaker.
The maximum electrical load that can be safely handled by a 20 amp 2-pole breaker is 40 amps.
The maximum electrical load that can be safely handled by a 15 amp 2 pole breaker is 30 amps.
The maximum electrical load that can be safely handled by a 15 amp 2-pole breaker is 30 amps.
A 2 pole breaker is a type of circuit breaker that controls two separate electrical circuits simultaneously. It is commonly used in applications where a higher voltage or larger electrical load is required. The 2 pole breaker functions by opening the circuit when an overload or short circuit occurs, thereby protecting the electrical system from damage.