answersLogoWhite

0

Appx. 4.5 grams

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Natural Sciences

A pad of paper 100 leaveshas a mass of 150g and a total thickness of 1cm find the thickness of a sheet of a paper?

To find the thickness of a single sheet of paper, divide the total thickness by the number of sheets: 1cm / 100 sheets = 0.01 cm per sheet.


What is practical unit of mass a piece of pad paper?

The practical unit of mass for a piece of pad paper is typically grams. A standard sheet of A4 paper weighs about 4.5 grams, while a standard letter-sized sheet weighs approximately 4.5 to 5 grams, depending on the paper's thickness and density. Therefore, when considering the mass of pad paper, grams provides a convenient and commonly used measurement.


How many square feet are in a ream of copy paper 8 X 11?

A ream of copy paper typically contains 500 sheets. Each sheet of 8 x 11 inches has an area of 0.61 square feet (calculated as 8/12 x 11/12). Therefore, a ream of paper would cover approximately 305 square feet (0.61 square feet per sheet multiplied by 500 sheets).


How do you calculate gsm in paper?

Take a paper of standard size. Measure its mass in gram using an electronic balance. Find its dimensions (length and breadth) in meter. Find the area in meter2. Get the gsm by dividing the mass in gram by area in meter2. Example: If the mass of a 42cmx33.5cm paper is 8.15gram then its gsm is 58 . (8.15/.42/.335 = 58) You will get more accurate results by using multiple sheets of paper. I usually use at least 10 sheets of paper, then you can either find the total area of the 10 sheets (multiply area of 1 sheet by 10), or divide the mass that you measured by 10, before doing the gsm calculation.


What is a texture of a bond paper?

The bonding of paper is colour sheet.

Related Questions

What is the mass of a sheet of notebook paper?

The mass of a sheet of notebook paper is typically around 4-5 grams.


How much does 1 sheet of copy paper weigh?

A standard sheet of copy paper typically weighs about 4.5 grams, which is equivalent to 0.01 pounds or 0.0045 kilograms.


What is the mass of 1 sheet of paper?

The mass of one sheet of paper can vary depending on the type and size of the paper. On average, a standard sheet of 8.5 x 11 inch printer paper weighs about 4.5 grams.


What is a hard copy of a work sheet?

A hard copy is a copy on paper, rather than just on the computer screen.


What is the mass of sheet of paper?

2,250 grams


What is the mass of a airplane?

The mass of a paper airplane is equal to the sheet of paper it is constructed out of, plus any additional materials.


How do you check prediction that a sheet of paper has a mass less that 1 kilogram?

To check if a sheet of paper has a mass less than 1 kilogram, you can use a scale. Place the sheet of paper on the scale and ensure it registers a mass less than 1 kilogram. If the scale reads a mass of less than 1kg, then the prediction is accurate.


What weighs more in mass a sheet of paper or a feather?

It depends on the size of the sheet of paper and the size of the feather. The only way to determine whether a particular sheet of paper has more mass than a particular feather is to compare them using a method that objectively measures mass. Using an accurate laboratory scale would be the easiest way to make this determination.


Which side do you put up when copying a paper?

When copying a paper, you put the side you want to copy face down.


Does the mass of a sheet of paper increase when you write on it?

Yes, it does ever so slightly by the mass of the ink that is added to the page.


What is the ply thickness of standard copy paper?

Paper is measured is grams per meter square. A standard sheet of A4 size is 80 grams per metre square. Thus a standard A4 sheet weighs 5g. The 'heavier' the paper the thicker it is.


Why would a flat sheet of paper and a wad of with the same mass not fall through the air at the same rate?

The reason a flat sheet of paper and a wad of paper with the same mass will fall at different rates is because of resistance. The wad has a smaller surface area than the sheet causing it to catch less wind and fall faster.