The outer plastic case on wire has got 2hot and gone all black hard an brittel
In new construction, typically the wiring is installed first before the insulation. This allows for the electrical components to be safely and properly placed throughout the structure before the insulation is added to the walls.
If the insulation is incomplete the installation will fail its inspection because it is potentially dangerous.
Domestic electric wiring is typically rated for a voltage of 120 to 240 volts and a current capacity ranging from 15 to 20 amps for standard residential applications. It is important to consult with a qualified electrician to ensure that the wiring meets the specific needs of your home and adheres to safety standards.
The resistance of tungsten is quite high, so the wires would have to be unusually thick to carry the current with the right small voltage drop. That would be extremely expensive, otherwise no problem.
Tungsten wire is not commonly used in domestic wiring. It is more commonly used in applications such as incandescent light bulbs, electronic components, and heating elements due to its high melting point and resistance to corrosion. Instead, copper wire is typically used in domestic wiring due to its excellent conductivity and cost-effectiveness.
Domestic wiring - is the wiring circuits in a house. Basically the ring main (that supplies all the sockets), cooker and lighting circuits.
Between .5 meg ohms to 2 meg ohms is a safe range for your house wiring insulation. Infinity is the ultimate.
domestic electrical wiring designig
The benefits of using PVC insulation in electrical wiring include its durability, resistance to moisture and chemicals, flexibility, and cost-effectiveness.
In new construction, typically the wiring is installed first before the insulation. This allows for the electrical components to be safely and properly placed throughout the structure before the insulation is added to the walls.
Breakdown of insulators refers to physical damage to the materials used to insulate electrical wires or other electrical equipment. Rubber or plastic can crumble away, it can be abraded, it can crack. No form of insulation is indestructible although some types of insulation are more durable than others. This is particularly a problem if you have wiring on the floor, and people step on it. Just as the soles of your shoes eventually wear away, so will insulation, if you are walking on it. But even without that kind of stress, rubber does tend to become more brittle with age.ANOTHER ANSWER'Breakdown' describes the failure of insulation that occurs when the voltage applied across that insulation exceeds its dielectric strength. This results in the failure of that insulation, and the passage of current through it.
One possibility is the underhood wiring insulation breakdown. The factory wiring is junk and needs to be replaces after a few years of service, particularely if the car has been operated in the tropics. You purchase the wiring as an assembly and just replace all. The underhood is the largest and most important assembly to replace, but there ia also an assembly going to the transmission. I had to replace all the wiring after about 7 years and 200 000 km of operation in the Florida heat. Even if this is not the problem you may want to consider this replacement, if you plan to keep the car. A very high number of Mercedes cars from the mid 90s, of all models, have this insulation breakdown problem.
If the insulation is incomplete the installation will fail its inspection because it is potentially dangerous.
Insulation that contains asbestos should be disposed of by a trained hazard waste crew. Insulation from wiring should be treated as a plastic and disposed of in plastic receptacles for recycling.
When dealing with old light switch wiring, it is important to consider the risk of electrical shock due to deteriorating insulation or faulty connections. It is advisable to turn off the power before working on the wiring, use proper insulation tools, and consult a professional if unsure about the safety of the wiring.
An ignition coil can arc to ground due to a breakdown of insulation within the coil or associated wiring, which creates a path for high voltage to escape. This can occur if the coil is damaged, worn, or subjected to excessive heat. Additionally, moisture or contaminants can compromise the insulation, leading to arcing. This can result in poor engine performance, misfires, or starting issues.
That's old school wiring, but if the insulation's good it's safe. The wiring on the secondary side of the transformer--the bell and the switch--runs on 24v.