Mainly copper.
Both copper and aluminum wire is used in the electrical trade. Copper in the smaller size wires but aluminum becomes more viable when bigger size wire is needed. This is usually 200 amp services and larger. When aluminum wire is used for a specific amperage, one size larger is required than when using copper. The money savings on aluminum wire over copper wire in the larger sizes is about 20%.
A fuse is a thin metal wire that is designed to melt when the electric current is too large, breaking the circuit and preventing damage to other components.
The green or green/yellow wire in an appliance connects its metal base to the ground through the household wiring. This wire is known as the ground wire and is an essential safety feature to prevent electric shocks in case of a fault.
Approximately 127 cm length of a wire with a diameter of 1mm can be used to make a 1cm cube of metal.
The covering of a wire is typically made of materials like plastic (such as PVC), rubber, or nylon. These materials provide insulation and protection for the metal conductor inside the wire.
Yes, because to conduct electricity you need a metal wire, (usually copper). However they have a plastic outer coating (sheath) which protects them and insulates them.
Electromagnets.
Electric current in a metal conductor is carried by a wire. This wire has been specifically adapted to carry this current.
copper plated aluminum wire
Copper and aluminum used for electric wires
An electrode
the metal casing of the electric kettle
Copper
Electric fuse wire is not made of a single metal but an alloy made of tin (63 %) & lead (37 %). The cross sectional area determines the melting point at a certain current (amps) and is also rated as volts / rating.
To answer the first part of your question the bulb looks sort of like an egg but has a more rounded top made of either clear or colored glass and the bottom consists of a metal piece that has the wire inside it. The wire is a thin piece of metal made of copper and an electric current runs through this wire creating light.
You melt the metal and pour it into a thin mold the size of the wire you want.
metal if its not metal than its not a wire
A fuse.