0
What else can I help you with?
What is the metal piece that fasten the handle to the tang?
The metal piece that fastens the handle to the tang is called a rivet. Rivets are permanent mechanical fasteners that hold the handle securely in place on the blade of a knife or tool.
What is the metal casting that holds all the other parts in place?
The metal casting that holds all the other parts in place is called a chassis. It provides structural support and rigidity to the components of a device or machinery.
If a piece of potassium metal is dropped in water then a vigorous reaction takes place with the formation of potassium hydroxide and hydrogen gas is evolved?
Yes, it is correct.
If a piece of metal bubbles was place in acid is that a chemical change?
No, it is not a chemical change. For example, if you put gold bubbles into any single acid, no chemical change will take place.
What are some chemical reactions?
some chemical reactions take place when a chemical is added to a metal. sometimes the chemicl turns cloudy, it may fizz or a coat of black may appear on the piece of metal. hope this helps! :)
What is the metal piece that holds the bulb in place?
The metal piece that holds the bulb in place is called a socket. It provides electrical contact to the bulb and secures it in position within the light fixture.
How do you make a 2002 Toyota Tacoma ashtray stay shut?
I had the same problem. I removed the ashtray and put a piece of duct tape on the top metal piece around the two brackets that hold it in place. Stays shut better than before. Other than that, you probably just need to buy a new one.
Does a flat piece of metal have air trapped within its sides?
No, a flat piece of metal does not have air trapped within its sides. Metal is a solid material that does not contain air pockets unless intentionally added during manufacturing processes like casting or forging.
What the metal part of pencil called?
The metal part of a pencil is called a ferrule.
My passenger side window in a 1997 Saturn will not roll down?
More than likely the piece of metal holding the gears aligned is bent. You can remove the outer panel and hammer the metal piece back in place.
What is the metal piece that fasten the handle to the tang?
The metal piece that fastens the handle to the tang is called a rivet. Rivets are permanent mechanical fasteners that hold the handle securely in place on the blade of a knife or tool.
Do pencil have metal?
Yes, pencils typically have a thin metal piece called a ferrule that holds the eraser in place. Additionally, some mechanical pencils have a metal tip that dispenses the lead as it is used.
How would I fix a front spring problem on a 97 Lincoln continental after I found a black horseshoeu shape piece of metal by passenger side on garage floor.?
that horseshoe shaped metal is to hold the air cylinoid into the air spring. check the air cylinoid make sure it is in place. that horseshoe shaped metal is to hold the air cylinoid into the air spring. check the air cylinoid make sure it is in place.
What is a woodriff key?
a woodruff key is a small piece of metal that holds something in place to keep it from moving..like a pulley
Where to place a wireless router?
It's better to put it on open place far from metal walls and grids. Usual walls are not a problem for signal.
How do you drill a hole in a bathtub?
Menards sells plugs that you put through the hole and on the back side is a threaded piece and you put a nut on the threaded piece and it holds it in place. It has a gasket so it wont leak. On the front its a round trim piece that looks like metal.
What is the metal piece at the end of a pencil called?
The part that holds the eraser on is called "ferrule" and the part you write with is normally graphite, but sometimes is lead or charcoal.
