Curborizing at high temperatures can lead to excessive carbon diffusion into the base metal, resulting in increased surface hardness but also increased brittleness. This can lead to reduced impact resistance and potentially premature failure of the components. It is important to control the process parameters carefully to avoid these issues.
High pressure = High temperature
High temperature=low viscosityLow temperature=high viscosity
high temperature will speed up the trace
why is the average high temperature in July in Seattle's in Indianapolis
High pressure and high temperature are related concepts but not the same. High pressure refers to the force exerted on a system, while high temperature refers to the amount of thermal energy present in a system. They can influence each other, for example, increasing pressure can sometimes lead to an increase in temperature.
Yes according to me if you can play, you can. If you play your temperature will not be high. But the only problem is that we cant as our body will be weak.
If the temperature start in - it means that is low. If the temperature starts with the number directly it means its higher than the temperature that starts with - .
Well I just had a high fever. I had migraines, cough, stuffed nose, high temperature and more symptoms.
Either there's a problem with your sensor, or there's a problem with your thermostat, and it's giving a false reading. Your engine temp may actually be high, as well - what you see on the gauge is the temperature of the coolant, not of the block itself.
Mountain do not have high temperature. They have low temperature.
High temperature High temperature
If the temperature goes up and down and the coolant level is ok your thermostat is probably sticking. Replace the thermostat and you should solve the problem.
High pressure = High temperature
High temperature=low viscosityLow temperature=high viscosity
37 degrees Centigrade is the same as 98.6 degrees Fahrenheit, which is normal body temperature. 38 degrees is equal to 100.4, so it shouldn't be a problem
Diagnostic error code number 118 with high temperature input on a Audi A4 means that the engine coolant is not running at the right temperature. When the engine is cold, it should be warm, and when the engine is warm, the temperature should be cooler in the engine. The problem could be with the Engine Coolant Temperature sensor or the vehicle could be low on fluid.
High temperature=low viscosityLow temperature=high viscosity