The relationship is that as the current passing through the wire increases so does the heating effect in the wire. To see its effect just use the formula:
W=I2R
R is resistance in ohms
I is current in amps
W is the heat output in watts
Hope this helps
Five electric appliances that make use of the heating effects of electric current are electric stoves, electric kettles, hair dryers, toaster ovens, and space heaters. These appliances contain heating elements that convert electrical energy into heat energy through the process of resistive heating. The heat generated by the electric current is then used for cooking, boiling water, drying hair, toasting bread, or heating a room.
The effect of current utilised in a bulb is the conversion of electrical energy into light energy through the heating of the filament inside the bulb. This process is known as resistive heating, where the current passing through the filament encounters resistance, causing it to heat up and produce light.
The heating effect is used. Normally the current flows through the fuse without undue heating. But if too much current passes through, the fuse will heat and melt, thus stopping the current which could cause a fire if it was not stopped.
Electric current is the flow of electric charge through a conductor, such as a wire. When an electrical appliance is plugged in, the electric current flows through the appliance's circuitry, providing the necessary energy for the appliance to function. The current powers various components within the appliance, such as motors, heating elements, or lights, allowing it to perform its intended function. In essence, electric current is the driving force that powers electrical appliances and enables them to work.
1. induces magentic field around the conductor.2.Generates heat in the conductor.3. Causes shock if flows through human body.AnswerThe three 'effects' of an electric current are its heating effect, its magnetic effect, and its chemical effect.It's magnetic effect (resulting in the force between parallel conductors) is used to define the ampere.
The heating effect of electric current was discovered by James Prescott Joule in the mid-19th century. Joule's experiments showed that the temperature of a conductor increases when an electric current passes through it.
The cost comparison between gas heating and electric heating depends on factors such as energy prices, efficiency of the heating system, and insulation of the home. Generally, gas heating is often cheaper than electric heating in terms of energy costs. Gas heating systems tend to be more efficient and cost-effective in the long run compared to electric heating systems. However, the initial installation cost of a gas heating system may be higher than that of an electric heating system. It is important to consider these factors when deciding between gas and electric heating options.
Heating Effect.
If the question means "What does electricity do for us?" then we could mention lighting, heating, cookers, refrigerators, telephones and cellphones, radios, TVs, computers for a simple start. If the question seeks to differentiate between electric voltage and electric current, then voltage is the measure of the energy of an electric charge and current is a measure of the flow of the charge.
The higher the current, the more heat generated. Also, the smaller the diameter of the wire, the higher the heat. It is important to choose the correct amperage rating of the wire to prevent fires.Another AnswerThe work done by an electric current is the product of the square of that current, and the resistance of the conductor. The resulting heat depends upon the difference between the temperature of the conductor and that of the surrounding air. Remember, heat is defined as the transfer of energy between objects at different temperatures.
Electric current is the flow of electric charge through a conductor. It produces various effects such as heating, lighting, and magnetism. In electronics, current is used to power devices and transmit signals.
Disadvantages of the heating effect of electric currents are: short circuits, house fires, and explosions. Advantages of the heating effect of electric currents are: electric light, toasting food, and keeping a room warm.
Heating effect of electric current is undesirable in electronic devices where overheating can lead to damage or malfunction. It is also undesirable in electrical transmission lines where energy loss due to heating reduces efficiency. Additionally, in some industrial processes where precise temperature control is required, excess heating can be a problem.
Disadvantages of the heating effect of electric currents are: short circuits, house fires, and explosions. Advantages of the heating effect of electric currents are: electric light, toasting food, and keeping a room warm.
The Ohmic heating equation describes how electrical resistance generates heat when current flows through a material. It relates to the process of heating materials by showing how the amount of heat produced is directly proportional to the electrical resistance and the square of the current passing through the material. This relationship helps in understanding and controlling the heating process in various applications, such as in electric stoves or industrial heating systems.
-kettle -electric heater that's all i have! :)) When a current passes through a wire, the wire heats up. This is caused by the conversion of electrical energy into heat energy. /the heat produced depends on the resistance of the wire.
The heating element of an electric heater is a "resistor", the cord which conducts the electricity is not. The resistance of the element of an electric heater is very high. As current flows through the heating element, it becomes red hot and glows. On the other hand, the resistance of the cord is low. It does not become red hot when current flows through it.