That depends on waht the instrument is and is being used for and what is being carried in the electrical cable. If the electrical cable is carrying DC, there is not much to worry about unless the current is very high. AC/modulated current in the electrical current will induce currents in the instrument cable but how great the problem will be depends on current and frequency.
Normally, a few inches separation would be enough.
If there is likely to be a significant probelm it would be normal to used screened cable for one or both.
Electrical devices such as plugs, connectors, or cords are typically attached to a receptacle for power supply purposes.
The minimum acceptable wire size for ground conductors in power cords for lengths less than 15 feet is typically 18 AWG. This gauge is commonly used for grounding purposes in shorter power cords to ensure proper safety and functionality.
The cost of a power cord can vary depending on the brand, length, and quality. On average, a basic power cord can range from $5 to $20. However, specialty or high-quality power cords can cost up to $50 or more.
The Mitsubishi LT-70 turntable requires a standard AC power supply rated at 110-120V and 60Hz. It is important to ensure that the power supply meets these specifications to avoid damaging the equipment.
Depending on what the power cord is for many stores carry power cords. If it's for a specific item you can always use Amazon. If it's generic, a store like Kmart or Home Depot carries a wide variety of power cords.
The older models of the Xbox 360 have a different power supply to the Xbox 360 S. You cannot get a power supply which will work on both consoles, therefore you will need to buy whatever power supply your console needs.
It depends on what cords your need. Certain power cords can be split with a female/ 2 male adapter that you could find at Tigerdirect.com or Newegg.com, wherever you shop. You can split molex and sata power cords for sure, i know that, but for anything else, just give a look for PSU splitters in one of those shops.
Neurons are in your brain, and are organic. While electrical cords are synthetic and supply electronics and many appliances or home decorating (such as lamps) with power.
Electrical devices such as plugs, connectors, or cords are typically attached to a receptacle for power supply purposes.
AT Power Supply - still in use in older PCs.ATX Power Supply - commonly in use today.ATX-2 Power Supply - recently new standard.
Any standard ATX power supply will work great with the Sun 9641A.
Cooler Master HAF-932 is a standard ATX case. You can use any standard ATX power supply. Remeber to to have enough power to the components used.
"Depending on the application, power cords can be purchased from a number of different sources. WalMart, Office Max, and Best Buy are a few businesses that offer a variety of power cords. There are also sources online that you can buy direct from as well."
TRUE
The minimum acceptable wire size for ground conductors in power cords for lengths less than 15 feet is typically 18 AWG. This gauge is commonly used for grounding purposes in shorter power cords to ensure proper safety and functionality.
Input would be 120v at 60hz. Standard US wall power.
The cost of a power cord can vary depending on the brand, length, and quality. On average, a basic power cord can range from $5 to $20. However, specialty or high-quality power cords can cost up to $50 or more.