0
The tiebreaker rule for a qualifying child is used to determine which taxpayer is eligible to claim certain tax benefits if more than one taxpayer could claim the child. The tiebreaker rules prioritize the parent over a non-parent, the parent who the child lives with for more than half the year, the parent with the higher Adjusted Gross Income, and finally, if no parent can claim the child, the taxpayer with the highest Adjusted Gross Income.
What else can I help you with?
Duplex receptacle circuit given 15 amp breaker 225 amp load?
A 15 amp breaker is not sufficient for a 225 amp load. You would need a breaker that matches the load current, such as a 225 amp breaker. Using a 15 amp breaker for a 225 amp load would cause the breaker to trip immediately due to overcurrent.
Can you tie-in 12 gauge with another 12 awg wire?
Yes but there are two stipulations, one that the join or splice must be made in a junction box that is accessible and has a removable cover and the second stipulation is that the breaker that is supplying the power can not be larger that the smallest conductor. In this case no breaker larger that a 20 amp breaker as #12 wire is only rated at 20 amps.
Is the amperage of a breaker for total amps combined or on each leg?
The breaker will trip at the amperage notated on the breaker. If it's 100A...it will trip at or around 100A. It does not matter if that breaker is physically tied to another 100A breaker. To understand this, imagine that you remove the mechanical tie from the two-pole breaker. Now you just have two 100A breakers. In actuality, you always had two 100A breakers. The mechanical tie does not change that. If you then powered two, separate 120 volt devices from the two breakers, each breaker would allow 100 amperes to pass to each of the devices before tripping. So why are they tied together? That is done when the two-pole breaker is to be used to power a 240 volt circuit. In AC current, electricity flows in both directions. In a 120 volt circuit, it flows "out" toward the device via the hot (generally the black wire) and "back" via the neutral (generally the white wire). Then the cycle reverses. It does this 60 times per second (60Hz). The amperage in the hot and neutral wires are the same (in the perfect world). Only the hot wire is connected to the breaker. In a 240 volt circuit, there is no neutral wire. You are using two "legs" of 120 volts each that are 180 degrees out of phase with each other. In other words, as leg 1 is flowing "out", leg 2 is flowing "back". Because they are out of phase, the potential difference is twice the voltage of each line or 240 volts. The current flows out and back at the same 60 Hz but this time via the two hot wires (generally black and red). Each of these hot wires are connected to the two terminals of the two-pole breaker. Due to mechanical tolerances, one breaker will most likely trip before the other. Therefore, if the rated current, (100 amps), is exceeded on either breaker, that breaker will trip and the other breaker will trip via the mechanical tie. This ensures that all power to the outlet is disconnected. If you removed the tie and only one breaker tripped, there would still be 120 volts connected to the outlet. In summary, each leg of a single, double (2 phase) or triple (3 phase) breaker is capable of allowing the amount of current denoted on the breaker. The connected circuit, regardless of voltage is protected from exceeding that amperage.
What is tie ht breaker?
A tiebreaker is a method used to determine a winner in a situation where participants have equal scores or results, such as in sports, games, or competitions. It can involve additional rounds of play, specific scoring criteria, or other mechanisms designed to break the tie. Tiebreakers ensure that a clear winner is established, particularly in events where rankings or progression are affected by the outcome.
Can you tie new dryer wire into old wire?
Yes, as long as the splice is made in a junction box that can have a cover attached to it and it must be accessable. This means its not to be covered with drywall. The wire must also be of the correct size and conductor count. For a dryer it is a 3 conductor #10 wire. The breaker size at the breaker panel is a two pole 30 amp.
Why does soccer have overtime?
Tie breaker
The probability that a tennis set will go to a tie breaker is 10 percent what is the probability that two of the three sets will go to a tie breaker?
The outcomes for each set is not independent. For a set to go into a tie breaker the players need to be very evenly matched. If they are, there is a greater probability that the sets will go into tie breaker. If you disregard that aspect of realitythen the answer is 0.0270, approx.
Is tie breaker really a candy bar?
No
Who ultimately wins in a Phase 10 tie breaker situation"?
In a Phase 10 tie breaker situation, the player with the lowest total score wins.
What was the score of the Minnesota and Chicago tie breaker?
Chicago won the tie breaker game for the 2008 AL Central Division championship by the score of 1-0.
How can I securely fasten a breaker handle to a tie?
You can securely fasten a breaker handle to a tie by using a zip tie or a small piece of wire to tightly wrap around the handle and the tie. Make sure it is snug and secure to prevent any movement.
What is the tie breaker trivia question for the final round of the game show?
The tie breaker trivia question for the final round of the game show is a question used to determine the winner in case of a tie between contestants.
When does a tie-breaker occer?
at the end of a game when the game is tied
What if the teams remain tied after the tie breaker in soccer?
Tie games are usually decided by penalty kick shootouts.
How do you compute Quotient rule in FIBA incase of triple tie and the losing team score is included?
Multiple ties require calculation to establish final positioning. In basketball the triple tie breaker requires adding up the teams scores to determine final rank.
What is played if the score at the end of a tennis set is tied?
a tie breaker!
How can a breaker tie be used to determine the winner in a competitive game or contest?
A breaker tie can be used to determine the winner in a competitive game or contest by having the tied participants compete in a final round or sudden death match to break the tie and determine the ultimate winner.
