I don't know but I need to find out because I have a tap to a washing machine that keeps dropping off because that exact thingy what screw in anymore. It seems to short for some reason. When I screw it in without the tap cover it screws down fine but when I screw it in over the tap like it's supposed to it screws on quite tight and then goes loose again and off comes the tap cover. Any suggestions would be appreciated thanks
As the spinal disc becomes less elastic, it can rupture. When the disc ruptures, a portion of the spinal disc pushes outside its normal boundary--this is called a herniated disc. When a herniated disc bulges out from between the vertebrae, the spinal nerves and spinal cord can become pinched. There is normally a little extra space around the spinal cord and spinal nerves, but if enough of the herniated disc is pushed out of place, then these structures may be compressed.
They believe the planets formed from a disc of gas and dust called a "protoplanetary disc".
The problem with aging spines is the fact that bone becomes lost and the vertebrae become thin. This thinning is called osteopenia (little bone) and (worse) osteoporosis (thin bone). The lower the vertebra in the vertebral column the more weight that is put on it and more likely it will become compacted. This causes the disc to herniate.
This is the basal disc. It is useful in helping the hydrozoans stick to and stay on the rocks around them.
The sievelike disc-shaped opening in an echinoderm's body through which water enters and leaves is called the madreporite. It is the entrance to the water vascular system, which helps in functions like respiration and movement.
A screw with a low disc and a chamfered outer edge. See related link for a pictorial. Pan head is A
A flat disc of cheese is called a wheel.
check brakes and disc on all four wheels they may be worn.
To adjust the Shimano disc brake adjustment screw on your bike, locate the screw on the brake caliper and use a compatible tool to turn it clockwise or counterclockwise to adjust the brake pad position. Make small adjustments and test the brake performance until you achieve the desired braking feel.
A ruptured disc does not work very well. The disc is between two vertebrae and provides padding between the two also a little movement. A ruptured disc is also called a herniated disc. The two vertebrae often come in contact then and can actually pinch the nerves coming off the court. This can produce a lot of pain and loss of muscle function.
As the spinal disc becomes less elastic, it can rupture. When the disc ruptures, a portion of the spinal disc pushes outside its normal boundary--this is called a herniated disc.
It is usually called a basket. the technical name is the disc pole hole, invented by the "Father of Disc Golf", "Steady Ed" Headric.
Yes it does a little...
be sure to purcahse the tool to "screw" the caliper piston in. If you try to push the piston in on rear disc brakes you will damange the caliper.
As the spinal disc becomes less elastic, it can rupture. When the disc ruptures, a portion of the spinal disc pushes outside its normal boundary--this is called a herniated disc. When a herniated disc bulges out from between the vertebrae, the spinal nerves and spinal cord can become pinched. There is normally a little extra space around the spinal cord and spinal nerves, but if enough of the herniated disc is pushed out of place, then these structures may be compressed.
It is popularly known as a slipped disc
A screw with a low disc and a chamfered outer edge. See related link for a pictorial. Pan head is A