answersLogoWhite

0

Extension wires are used to extend the reach of an electrical outlet, allowing you to power devices that are located further away. They provide additional length for connecting appliances, tools, or electronics to a power source without the need for additional outlets. It is important to use extension wires safely and avoid overloading them with too many devices.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

Is the ribbed wire on a extension cord the black?

The ribbed wire on an extension cord is typically the neutral wire. The black wire is usually the hot wire. It's important to check the manufacturer's instructions or consult a professional if you are unsure.


Can a microwave be plugged into an extension cord?

Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.


Is the ridged wire positive on an extension cord?

An extension cord that you plug into your house is neither positive OR negative. It uses alternating current so there's a live wire and a ground. Only direct currents (like those in cars) have positive and negative. On a two wire extension cord the ribbed side is the neutral. If you look close and it is a moulded plug on the end of the extension cord you will find that the side with the rib is also the same side as the wider blade on the plug. This corresponds to the wide blade hole in the receptacle which is also the neutral side of the receptacle.


What size wire for a welding extension cord 220v 50 amps?

For a 220V 50A welder, you would need a minimum of 6-gauge wire for your extension cord to ensure it can handle the current safely. It's recommended to use a heavy-duty, outdoor-rated extension cord with appropriate wire gauge and length to avoid voltage drop and overheating.


What is the proper gauge of wire for an extension cord for a 700 watt microwave oven?

The most common wire size for an extension cord to use would be a #14 conductor. As extension cords are classed as flexible cords, the proper terminology would be a 3C/14. The cord consists of three #14 conductors, whose colouring is white, black and green covered by a plastic sheath.

Related Questions

Which wire is hot on an extension cord?

The wire that is hot on an extension cord is typically the black wire.


What is the extension wire used for on an outdoor gourmet Triton gas grill?

According to the grill guy at Academy, the extension wire is used as an alternate way to light the grill. Clip a match into the end of the extension wire, light the match, and then use the extension wire to light your grill without placing your hand too close to the burners. Makes sense, but I would suggest they rename this part "manual grill lighter extension wire."


Is the ribbed wire on a extension cord the black?

The ribbed wire on an extension cord is typically the neutral wire. The black wire is usually the hot wire. It's important to check the manufacturer's instructions or consult a professional if you are unsure.


What is the recommended length and type of extension cord to use for a dryer plug extension cord?

The recommended length for a dryer plug extension cord is 25 feet or less, and it should be a heavy-duty, 10-gauge wire extension cord to handle the high power requirements of a dryer.


Can a microwave be plugged into an extension cord?

Yes, as long as the extension cord is rated for the load. Most microwave ovens use 1000W or more, some less. A standard two wire extension cord would be unsafe. There are, however, extension cords which have the proper gauge of wire and the necessary 3-prong outlets which a microwave would need to operate safely.


Is the ridged wire positive on an extension cord?

An extension cord that you plug into your house is neither positive OR negative. It uses alternating current so there's a live wire and a ground. Only direct currents (like those in cars) have positive and negative. On a two wire extension cord the ribbed side is the neutral. If you look close and it is a moulded plug on the end of the extension cord you will find that the side with the rib is also the same side as the wider blade on the plug. This corresponds to the wide blade hole in the receptacle which is also the neutral side of the receptacle.


What size wire for a welding extension cord 220v 50 amps?

For a 220V 50A welder, you would need a minimum of 6-gauge wire for your extension cord to ensure it can handle the current safely. It's recommended to use a heavy-duty, outdoor-rated extension cord with appropriate wire gauge and length to avoid voltage drop and overheating.


How do you get a spark plug socket out that came off the extension?

Wire coat hanger or push longer extension into it and pull out.


What is the proper gauge of wire for an extension cord for a 700 watt microwave oven?

The most common wire size for an extension cord to use would be a #14 conductor. As extension cords are classed as flexible cords, the proper terminology would be a 3C/14. The cord consists of three #14 conductors, whose colouring is white, black and green covered by a plastic sheath.


Does a long extension cord draw more power than a short extension cord?

No. However, a longer extension cord has higher resistance for a given wire gauge or size compared to a short extension cord and the voltage at the load device may drop so low that it doesn't work properly. This may also be accompanied by a noticeable rise in the temperature of the extension cord. As a rule, use the shortest extension cord that will get the job done. If the extension cord must be long, use one that has heavy gauge wire to minimize voltage drop at the load.


How can I safely use an extension cord wire to power my electronic devices?

To safely use an extension cord to power electronic devices, make sure the cord is in good condition without any fraying or damage. Use a cord that is rated for the power needs of your devices and avoid overloading it. Plug the cord directly into a wall outlet, not into another extension cord. Unplug the cord when not in use to prevent overheating.


Do you need to use TC extension wire to connect a thermocouple or can you use shielded cable?

You must use thermocouple wire (of the same type as the thermocouple) to extend the circuit. If you switch to a different wire the point of connection between the two becomes a thermocouple junction itself, and the resulting voltage from that junction will skew your reading. You can use any wire to extend a thermocouple connection if you know the temperature of the junction where the thermocouple wire ends--this becomes the reference junction.