To determine the volume of water in a half-filled bath, you need to know the total capacity of the bathtub. For example, if a bathtub has a capacity of 150 liters, then half-filled would contain 75 liters of water. Simply divide the total volume by two to find the volume of water when the bath is half full.
The effective dielectric constant for the system would be the weighted average of the dielectric constants of water and mica, calculated based on their respective volumes in the half space. This can be determined using the formula: effective dielectric constant = (V_water * ε_water + V_mica * ε_mica) / (V_water + V_mica), where V is the volume fraction and ε is the dielectric constant for water and mica.
Because a gas will expand to fill the other half. Gas has no defined volume. Liquids do.
Half a jug as the surface area to volume ratio is reduced therefore heat can escape quicker from the surface
The volume reach the half.
the volume of any liquid that can fill half of an ordinary glass
To calculate the volume of a half-filled bath, you first need to determine the total volume of the bathtub. This is typically measured in gallons or liters. Once you have the total volume, simply divide that number by two to find the volume of water in a half-filled bath. For example, if a bathtub holds 80 gallons, a half-filled bath would contain 40 gallons of water.
To determine the volume of water in a half-filled bath, you'll need to know the total capacity of the bathtub. For example, if a standard bathtub holds about 40 gallons (approximately 151 liters) when full, then a half-filled bath would contain about 20 gallons (about 76 liters) of water. The exact volume will vary depending on the specific size and shape of the bathtub.
The amount of water in a half-filled bath would depend on the size of the bath. Half-filled means the bath is filled to half its capacity. You would need to know the total capacity of the bath to determine the exact amount of water.
He filled a bath half way with water then when he went in he found out that the water moved up, he wondered how that happened. So he started to study further into it....
You simply calculate it like a cone, but the height of the cone is the height to the top of the FILLED part, not all the way. Half-filled is not enough information . . . there can be "half filled" meaning half the height of the cone, but can also be "half filled" meaning half the volume of the cone.
you need to fill a bath half full. then get into the bath and go under the water. the resultant height change in the water level will reflect you volume. I would suggest that you remain under the water for at least 10mins to allow the water surface level to stablise
like the volume of a tv series like volume 1 volume 2 etc for example the Pokemon series
When you drop a piece of stone into a glass half filled with water, the stone will displace some of the water, causing the water level to rise. This is known as the principle of displacement. The amount of water displaced will be equal to the volume of the stone that is submerged.
It depends on what size bathtub you have.
1. Fill bath half way 2. Mark the level of the water with a marker pen (line A) 3. Get into the bath 4. Completely submerge yourself into the water, get someone to mark the level of the water with you still completely submerged (line B) 5. Get out of the bath 6. The water level should have gone down back to line A 7. Using a mesuring jug, fill the bath until it has reached line B.. keeping count of the amount of water you've added. 8. The amount of water you added is your body volume :)
depends on the size of the bath tub
A partial bath in a home is also sometimes called a half bath, or a 3/4 bath. A half bath has a sink and toilet, a 3/4 bath has a shower, sink, and toilet.