33/.42=78.57 lbs.
A 100 pound propane cylinder can hold approximately 23.6 gallons of water.
The Letters "WC" on a propane tank stand for "Water Capacity", and are followed by a number which would identify the tanks Water Capacity typically measured in lbs. Water weighs approximately 8.3lbs per gallon Propane weighs approximately 4.24lbs per gallon
Propane tanks are rated for water capacity because it helps determine the tank's overall volume and its ability to safely store propane gas under pressure. Water capacity is used as a standard unit of measure in the propane industry for consistency and safety regulations.
Assume liquid propane has a specific gravity of .51. For a liquid with that property DOT regulations say that for tanks under 1200 gallons, the maximum permitted filling density of the tank is 42% of the water weight capacity. Assume water weighs 8.33 lbs/gal. 285 x 8.33 = 2374 lbs capacity. 2374 x .42 = 997 lbs.
A graduated cylinder or a beaker can be used to measure the volume or capacity of a water bottle by pouring water from the bottle into the measuring instrument and reading the volume indicated on the scale.
A 100 pound propane cylinder can hold approximately 23.6 gallons of water.
The Letters "WC" on a propane tank stand for "Water Capacity", and are followed by a number which would identify the tanks Water Capacity typically measured in lbs. Water weighs approximately 8.3lbs per gallon Propane weighs approximately 4.24lbs per gallon
Propane tanks are rated for water capacity because it helps determine the tank's overall volume and its ability to safely store propane gas under pressure. Water capacity is used as a standard unit of measure in the propane industry for consistency and safety regulations.
100 gallons? Are you kidding me. Who asked this question. You need not be dealing with propane. Believe it or not, there are 1000 US Gallons in a 1000 "Gallon" propane tank. Some peoples kids.
By pouring hot water on a propane cylinder you are heating the metal cylinder. The liquid propane in the cylinder is cold and forms condensation on the outside of the cylinder showing the level of propane remaining in the tank much like condensation forming on a glass of ice water on a hot day.
The letters "TW" on a propane tank stand for "Tested Water," indicating that the tank has been tested for water capacity. "DT" refers to "Design Type," which is part of the tank's specification related to its design and construction. These markings help ensure the tank meets safety regulations and standards for storage and transportation of propane.
Assume liquid propane has a specific gravity of .51. For a liquid with that property DOT regulations say that for tanks under 1200 gallons, the maximum permitted filling density of the tank is 42% of the water weight capacity. Assume water weighs 8.33 lbs/gal. 285 x 8.33 = 2374 lbs capacity. 2374 x .42 = 997 lbs.
A graduated cylinder is used to measure the volume, or capacity of water. Or to just measure Water.
You can not answer that question without knowing more about the size of the hot water heater, the size of the stove and oven combo. How often the stove/oven is used, and how much hot water is heated. Water temp. is a factor as well.
It should weigh 45kg + the TARE weight of 36.6kg for the bottle = 81.6kg when full. The WC (water capacity) of the bottles are 109.8kg and LPG weighs 41% of water = 45kg. This is a good check to see if you are being ripped off by your gas supplier.
As many as were put into it, subject to the total capacity of the cylinder.
A graduated cylinder or a beaker can be used to measure the volume or capacity of a water bottle by pouring water from the bottle into the measuring instrument and reading the volume indicated on the scale.