The weight of glycol will depend on the quantity!
Go google and you will find out: the specific gravity (weight in volume) of ethylene glycol is 1.1132 g/cm³, the specific gravity of water is 0.998 g/cm³ (20C). (so ethylene glycol is heavier than water. ) a gallon of water weights 8.33 lbs. 8.33x1.1132/0.998=9.29lbs a gallon of ethylene glycol is 9.29lbs
no, but polyethylene glycol is.
Ethylene glycol is not of animal origin !
Propylene glycol is generally considered safer than ethylene glycol for use in coolant/antifreeze due to its lower toxicity. This makes propylene glycol a preferred choice for applications where accidental ingestion may occur, such as in RVs or marine engines. Additionally, propylene glycol is less harmful to the environment compared to ethylene glycol.
Propylene glycol has covalent bonds.
The molar mass of ethylene glycol is 62,07 g.
The weight of a liter of propylene glycol is approximately 1.036 kilograms.
The weight of glycol ether per gallon depends on the specific type of glycol ether being considered. On average, glycol ethers weigh around 7.5 to 8.5 pounds per gallon. It is recommended to check the specific gravity or density of the specific type of glycol ether for a more accurate weight measurement.
The weight of ethylene glycol depends on the quantity being measured. The density of ethylene glycol at room temperature is around 1.11 grams per cubic centimeter. You can calculate the weight by multiplying the volume in cubic centimeters by the density.
The weight of 1 gallon of glycol can vary depending on the specific type and concentration of glycol, but generally, it weighs around 9 to 10 pounds.
Polyethylene oxide and polyethylene glycol are both polymers made of repeating ethylene glycol units. The main difference between them is their molecular weight. Polyethylene oxide has a lower molecular weight and is a liquid at room temperature, while polyethylene glycol has a higher molecular weight and is a solid or semi-solid at room temperature. Additionally, polyethylene glycol is commonly used in pharmaceuticals and cosmetics, while polyethylene oxide is used in industrial applications.
Yes, polyethylene glycol is commonly used as a base ingredient in automotive antifreeze and coolant products due to its ability to lower the freezing point of water and prevent engine coolant from freezing in cold temperatures.
No. Polyethylene glycol has an extremely low toxicity compared to either of the others.
Go google and you will find out: the specific gravity (weight in volume) of ethylene glycol is 1.1132 g/cm³, the specific gravity of water is 0.998 g/cm³ (20C). (so ethylene glycol is heavier than water. ) a gallon of water weights 8.33 lbs. 8.33x1.1132/0.998=9.29lbs a gallon of ethylene glycol is 9.29lbs
no, but polyethylene glycol is.
Yes, glycol is conductive.
No, not usually. The only way that glycol can contain a corn product is if it is corn glycol. And corn glycol is rarely sold.