If you take the standard piece of paper as having a width of 8.5 inches, then the conversion to cm and mm is as follows:
8.5 inch x 2.5 cm/inch = 21.25 cm
21.25 cm x 10 mm/cm = 212.5 mm
The metric unit used for measuring the width of a fingernail is usually millimeters (mm).
You could use either inches or centimeters to measure the width of a sheet of paper.
To measure the width of a pencil sharpener, you would typically use centimeters or millimeters, as these units provide a precise measurement suitable for small objects. For most pencil sharpeners, centimeters are convenient for general use, while millimeters can offer a more detailed measurement if needed.
The estimating unit of measure for the width of a fingernail is typically in millimeters (mm) or centimeters (cm). Some may also use inches (in) as a measurement unit, but millimeters are the most commonly used unit for the width of a fingernail.
To measure the width of a stamp, you would typically use millimeters (mm) as the metric unit. Stamps are generally small, and millimeters provide a more precise measurement than centimeters or meters. For example, a standard postage stamp might measure around 25 mm in width.
Millimeters, or centimeters.Millimeters, or centimeters.Millimeters, or centimeters.Millimeters, or centimeters.
To convert the width of each coin from millimeters to centimeters, divide the measurement in millimeters by 10, since there are 10 millimeters in a centimeter. For example, if a coin is 25 millimeters wide, you would calculate 25 mm ÷ 10 = 2.5 cm. This simple division will give you the width in centimeters.
they are measured in centimeters.
0.2. there are 10mm in a cm
It is simply divide the width - in mm - by 10.
51.7628 cm
The width of a pencil would be the metric unit of centimeters
Millimeters or centimeters.
8.27" (210 millimeters)
To find the area of a rectangle, you multiply the length by the width. First, convert the width and length to millimeters by multiplying by 10 (since 1 cm = 10 mm). So, the width becomes 87 mm and the length becomes 93 mm. Then, multiply the width by the length: 87 mm * 93 mm = 8091 square millimeters. Therefore, the area of the rectangle is 8091 square millimeters.
Millimeters measure one dimension - length. Cubic centimeters need three dimensions - usually length, width, and height. One cannot be converted to the other.
centimeters is the best unit but millimeters can also be used.