answersLogoWhite

0

What else can I help you with?

Continue Learning about Natural Sciences

Where is the frames panel in Fireworks CS5?

In Fireworks CS5, the "frames" panel can be found in the "Layers" panel. It allows you to manage the different frames of an animated GIF or PNG file. You can access it by clicking on the tab labeled "States" within the Layers panel.


How do you wire a 15 amp 120V breaker in a 240v 30 amp breaker panel?

Look to see if the 30 amp panel is fed with a two wire or a three wire. If it is a two wire then you are out of luck. If the panel is fed with a three wire then the panel should have the neutral terminated in the panel. It is this neutral that you need for 120 volt connections. You didn't state how many panel slots there are in the panel. If you are able install a 15 amp breaker into the panel and connect the wires going to the load. The black wire will go to the breaker and the white wire will go to the neutral bar in the panel.


Will a panel breaker for one manufacturer's panel fit on a different manufacturer's panel?

No, panel breakers are designed to fit specifically in the panel they are made for. Using a breaker from one manufacturer in a different panel could lead to compatibility issues, safety hazards, and potentially void warranties. It is always best to use breakers that are compatible with the specific panel being used.


What is the largest sub panel you can install off from a 60 amp main panel fed by 100 amp service?

If what you state in this question is accurate this is an illegal installation. A 100 amp service can not have any equipment connected to it less that that of the service size. The 60 amp main panel must be a 100 amp panel to be a legal installation.


How many circuits are on a 150 amp panel?

As many as needed; panel capacities are different from each other in amps and space. there should be a sticker on the door of the panel that tells of how many breakers can be installed in that panel. regarding the amps, a load calculation can be made to determine the full load used on such a panel.