answersLogoWhite

0

The liquid left behind after a solid has been dissolved in a solvent is typically a homogeneous mixture. This means that the components of the liquid are evenly distributed and cannot be easily separated by physical means.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Natural Sciences

When water evaporates from a body of water what kind of sediment is left behind?

The sediment is a mixture of sand, soil, salts, detritus.


What happens to the particles in distillation?

In distillation, the particles in a liquid mixture are separated based on their boiling points. When the mixture is heated, the component with the lower boiling point vaporizes first, rises, and condenses back into a liquid in a separate container. The remaining components are left behind in the original container.


What is decanting?

'''''Decantation''''' is a fast method for separating a mixture of a liquid and a heavier solid. In this process , first the solid impurities are allowed to sediment at the bottom of the container. Then, the pure liquid is poured out carefully from the container into another container. The precipitate or solid is left behind at the bottom of the container.


What are you going to use to separate a mixtures using decantation?

Usually solids with liquid. As an example liquid wine can be decanted from the dregs of left over yeast/sediment etc.


What is the physical method of separating the solid and liquid components of a mixture?

The physical method for separating solid and liquid components of a mixture is called filtration. In this process, the mixture is poured through a filter paper or a porous material that allows the liquid to pass through while retaining the solid particles. The liquid collected is called the filtrate, while the solid left on the filter is referred to as the residue. This technique is commonly used in laboratories and various industrial applications.

Related Questions

A clear liquid in an open container is allowed to evaporate and after three days a solid is left in the container so was the clear liquid an element a compound or a mixture and how do you know?

The clear liquid was most likely a mixture since only mixtures can separate through evaporation to leave behind the components in their original forms. Elements and compounds do not separate this way. The solid left behind may indicate that one of the components in the mixture had a lower boiling point than the others.


When water evaporates from a body of water what kind of sediment is left behind?

The sediment is a mixture of sand, soil, salts, detritus.


What happens to the particles in distillation?

In distillation, the particles in a liquid mixture are separated based on their boiling points. When the mixture is heated, the component with the lower boiling point vaporizes first, rises, and condenses back into a liquid in a separate container. The remaining components are left behind in the original container.


what other method of separating a liquid from a solid did you learn today other than filtration?

Methods of separating a solid and liquid rather than filtration. (a)When a solid and liquid are soluble,a method know as evaporation is used.When this mixture is heated,the liquid will evaporate and the solid will be left and obtained after evaporation. (b)When the mixture is insoluble,it is separated by use of decantation.The mixture is given some time to settle and the liquid is poured into another beaker and the the solid is left in the initial beaker.


What mixture could be separated by evaporating the liquid?

A saltwater mixture can be separated by evaporating the liquid. When the water evaporates, the salt is left behind as a solid residue. This process is commonly used to obtain salt from seawater or to separate dissolved solids from water in industrial processes.


Which mixture can be separated water stirring and filtering?

A mixture of water and sand can be separated by stirring the mixture to dissolve the sand in water, followed by filtering the mixture using filter paper. The sand will be left behind as residue on the filter paper, while the water passes through as filtrate.


What kind of animal left behind a cougar paw print in the snow?

A cougar left behind the paw print in the snow.


What method is used when heating or boiling a mixture to recover the solid elements?

Usually you simply boil down the liquid until your left with whatever solid there is. The solid all evaporates into steam, leaving the solid behind. You can also boil it down to about 20% original volume and then filter it with a coffee filter or something similar.


Can you separate a soluble from a liquid?

Yes, you can separate a soluble from a liquid by using the method of filtration. This involves passing the mixture through a filter paper, which allows the liquid to pass through while the soluble substance is retained on the filter paper. The liquid collected in the receiver is now separated from the soluble substance.


Is liquid gas an element mixture or compound?

A compound is where the elemental components are chemically bonded at the molecular level and can only be separated with great effort (not evaporation). The liquid could have been a mixture (hard water for example; water with minerals, fluoride, calcium, salt whatever) and the dissolved minerals left behind when the liquid evaporated. However the liquid itself could be a compound (such as pure water) but the fact it left behind 'impurities' when it evaporated means it became a mixture or colloid when the impurities mixed into the liquid. So if the container was completely clean when the liquid was put in and there was no possibility of impurities being introduced from the air or other sources, it was a mixture before it evaporated.


Is the white substance left behind when tap water evaporates is it a pure substance or a mixture?

It would be a mixture of various minerals and chemicals if any were present in the water before evaporation


What kind of casting method is resin casting?

Resin casting is done by use of a mold and a mixture made with a form of liquid synthetic resin. It is then poured or injected into the mold and left to sit until hardened.