pro-grow 180's four of them is exactly 600 watts draw powder from the plug, it will give you good spread and watts.
One can buy 1000 watt HPS bulbs through the better known webshops like Amazon or eBay. 1000 watt HPS bulbs are most often just to grow specific plants at home.
180000
About 150 watts.
The cost to run a 400 watt HPS light will depend on your electricity rate. On average, running a 400 watt HPS light for 1 hour will cost around $0.06 to $0.12. To calculate the monthly cost, multiply the hourly cost by the number of hours the light is on each day, then multiply by 30 days.
No, you cannot use a 1000 watt HPS (high-pressure sodium) lamp without a ballast. The ballast is essential for regulating the electrical current flowing through the lamp, which is necessary for it to operate properly and prevent damage. Trying to operate a 1000 watt HPS lamp without a ballast can result in the lamp not lighting up or malfunctioning.
One can buy 1000 watt HPS bulbs through the better known webshops like Amazon or eBay. 1000 watt HPS bulbs are most often just to grow specific plants at home.
In general no, because the extra heat produced would make it a fire hazard.
Yes, you can run a 400-watt metal halide (MH) bulb in a 600-watt high-pressure sodium (HPS) fixture, but you need to ensure that the ballast is compatible with the MH bulb. Using a 400-watt MH bulb in a 600-watt ballast may lead to reduced efficiency, as the ballast will deliver more power than the bulb requires. It's essential to check the ballast type and ensure that it can operate both bulb types safely. If not compatible, it's best to use the appropriate ballast for the MH bulb to avoid damaging the bulb or the fixture.
180000
About 150 watts.
No, you cannot use a 1000 watt HPS (high-pressure sodium) lamp without a ballast. The ballast is essential for regulating the electrical current flowing through the lamp, which is necessary for it to operate properly and prevent damage. Trying to operate a 1000 watt HPS lamp without a ballast can result in the lamp not lighting up or malfunctioning.
The cost to run a 400 watt HPS light will depend on your electricity rate. On average, running a 400 watt HPS light for 1 hour will cost around $0.06 to $0.12. To calculate the monthly cost, multiply the hourly cost by the number of hours the light is on each day, then multiply by 30 days.
No, the ballast has to be matched to the lamp. 250 watt ballast, 250 watt lamp. Also be sure to match the lamp type to the proper ballast even though the wattage is the same. HPS ballast to HPS lamp, Metal halide ballast to metal halide lamp and mercury vapour lamp to mercury vapour ballast.
A 250-watt HPS (High Pressure Sodium) bulb typically produces around 28,000 lumens at the initial phase of operation. However, this can decrease over time as the bulb ages.
I would wire them together in a parellel circut. all the lights together, white to white black to black then put your ballast to em. it works like that with my 400 watt mh/hps ballast and 2 250 watt hps bulbs. run 2 hps bulbs with 2 mh bulbs if you can, you get better results.
It is recommended to transition to a 400 watt HPS light from germination when the seedlings have developed their first set of true leaves. This is usually around 2-3 weeks after germination. The increased light intensity can help support healthy growth as the plants enter the vegetative stage.
No high pressure lbs require a specific ballasts to operate the bulb correctly