0
What else can I help you with?
Can you mold aluminum?
Usually for plastic injection mould, the material is steel.And in some special case Aviation aluminum can be used. we have experince in making plastic injection mould with aluminium. if you want more details, pls contact us: Sino Mould Co., Ltd, www.sinomould.com, mould@sinomould.com
What are the steps of extrusion moulding?
The process of Injection Moulding Cycle has the following 4 stages:- 1. Clamping- The multiple parts of the mould are securely clamped. 2. Injection- The raw plastic material, usually in the form of pellets, is fed into the machine. During this process, the pellets are melted by heat and pressure. The molten plastic is then injected into the mould by injection unit very quickly and the build-up of pressure packs and holds the material. 3. Cooling- The molten plastic that is inside the mould begins to cool as soon as it makes contact with the interior mould surfaces. As the plastic cools, it will solidify into the shape of the desired part. However, during cooling some shrinkage of the part may occur. The packing of material in the injection stage allows additional material to flow into the mould and reduce the amount of visible shrinkage. The mould can not be opened until the required cooling time has elapsed. 4. Ejection- After sufficient time has passed, the cooled part may be ejected from the mould. When the mould is opened, a mechanism is used to push the part out of the mould. Force must be applied to eject the part because during cooling the part shrinks and adheres to the mould.
What is the difference between injection molding in thermoplastics and injection molding in thermosetting plastics?
hi... EXTRUSION MOULDING means after the polymer granules are fed in hopper then it melts in barrel and go thru the rotating screw....a mould is fitted at the end of this assembly that continuously extrudes the polymer in a continuous long particular shape as pipe etc. this later can b cut at regular intervals if needed... while in INJECTION MOLDING as the molten polymer reaches the mold it takes the shape there cooled and then taken out frm the mold...if it consists of runners etc.then its separated and then the process agn starts... thus extrusion molding is a continuous process while injection molding is not. extrusion moulding is a continuous process, it gives a constant section.
Mould temperature affect the properties of a thermosetting plastic?
Yes, mould temperature significantly affects the properties of thermosetting plastics. Higher mould temperatures can enhance the curing process, leading to improved mechanical properties, reduced brittleness, and better dimensional stability. Conversely, lower mould temperatures may result in incomplete curing, affecting the final product's strength and thermal resistance. Therefore, controlling mould temperature is crucial for optimizing the performance of thermosetting plastics.
Is a mixture of dead organic material that can be used as fertilizer.?
Compost, leaf mould, manure, composted manure etc
How do you get injections?
In order to get a plastic product, we need a mould and a injection machine, you need to put the plastic material into the loader of the injection machine, then the material will melt in the barrel of the machine, then the machine will injected into the mould, then you will a product.
What is injection molding plastic used for?
Injection molding plastic is a tool used to mold hard material through thermal heat, for example steel or aluminum are not metals that could be heated using the tool which makes the material easier to manipulate or mold into varies of shapes. The tool is often seen used by engineer.
What is the Injection Unit is responsible for injection molding machine?
It is responsible for material charging and injection. It helps inject the material into the mould.
How do you estimate the capacity of plastic injection machine?
The injection machine capacity depends on both mould and product. first you need to know what product you want to produce. For the same injection machine, if the product is different, the injection machine capacity is different. If you need to buy plastic injection machine or plastic injection mould, welcome to send inquiry to: service@sino-pm.com
Can you mold aluminum?
Usually for plastic injection mould, the material is steel.And in some special case Aviation aluminum can be used. we have experince in making plastic injection mould with aluminium. if you want more details, pls contact us: Sino Mould Co., Ltd, www.sinomould.com, mould@sinomould.com
What are the steps of extrusion moulding?
The process of Injection Moulding Cycle has the following 4 stages:- 1. Clamping- The multiple parts of the mould are securely clamped. 2. Injection- The raw plastic material, usually in the form of pellets, is fed into the machine. During this process, the pellets are melted by heat and pressure. The molten plastic is then injected into the mould by injection unit very quickly and the build-up of pressure packs and holds the material. 3. Cooling- The molten plastic that is inside the mould begins to cool as soon as it makes contact with the interior mould surfaces. As the plastic cools, it will solidify into the shape of the desired part. However, during cooling some shrinkage of the part may occur. The packing of material in the injection stage allows additional material to flow into the mould and reduce the amount of visible shrinkage. The mould can not be opened until the required cooling time has elapsed. 4. Ejection- After sufficient time has passed, the cooled part may be ejected from the mould. When the mould is opened, a mechanism is used to push the part out of the mould. Force must be applied to eject the part because during cooling the part shrinks and adheres to the mould.
What is a plastic injection machine?
The injection machie can be clssified in to standard injection machine, PET injection machine, PVC injection machine, according to which material theya suitable to and can also be classified into standard machine, variable pump machine and servo motor machine according to its motor and pump can be classified into electial injection machine, hydraulic injection machine and hybrid injection machine accoording to its power source. for more info, pls contact turnkey@dakumar.com
What types of mould are there?
injection mould blow mould extrusion mould Comprssing mould
How do you quote an injection mold?
To quote for an injection mold, first you need check the sample or product design to know the mould structure. Then you calcuate mould steel cost, labot cost, tooling cost. then you add all cost togther. Looking for plastic mould supplier, pls send details to: mould@sinomould.com
What is injection molding used for?
it is an industrial process, that can make huge batches easily. Melted plastic is injected into a mould and then allowed to cool. the mould is opened and the shape is released
How can you tell if an object has been injection moulded?
There will be a small raised area that is rough to the touch and can be found where the plastic has entered the mould.
What is injection molding?
Injection molding is a commonly used manufacturing process for the fabrication of plastic parts. the injection molding process need injection mold and injection machine.--------------------------------------------------------Injection molding is a manufacturing process for producing parts from both thermoplastic and thermosetting plastic materials. Material is fed into a heated barrel, mixed, and forced into a mold cavity where it cools and hardens to the configuration of the mold cavity.After a product is designed, usually by an industrial designer or an engineer, molds are made by a moldmaker (or toolmaker) from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection molding is widely used for manufacturing a variety of parts, from the smallest component to entire body panels of cars.the following is a photo of the injection molding process:http://www.vulcanmold.com/article/Plastic-Injection-molding-process.htmlA Hollow mould is made from steel in several parts. when the mould is all together the hollow within it is the same shape as the object you wish to produce. The mould is water cooled to keep its temperature under control. molten plastic is forced into the mold at high pressure. it is left to cool for a specified period of time, then the mold is pulled apart in such a way that the object falls out of the mould and the whole thing starts all over.
