0
What must be done to the hot gas leaving the compressor before it may be condensed?
Before the hot gas leaving the compressor can be condensed, it must be cooled to a temperature below its saturation point. This typically involves passing the gas through a heat exchanger or condenser where it loses heat to a cooling medium, such as air or water. Additionally, any superheating should be minimized to ensure efficient condensation. Once adequately cooled, the gas can then be condensed into a liquid phase.
What else can I help you with?
Process of separation in salt water?
The process of separating salt from water is called desalination. This can be done through methods like distillation, where the water is evaporated and then condensed, leaving the salt behind, or through reverse osmosis, where pressure is used to push water through a membrane that filters out the salt.
Why distillation cannot be done with volatile solids dissolved in liquids?
The volatile solids will have a vapor pressure at the boiling point of the liquid which means some of that solid will vaporize and go thru the distillation process with the liquid. When condensed you will not get a pure liquid.
What is the opposite of during?
There is no single opposite of the preposition during (at the same time as). Something done "not during" could either be done before or done after.The similar adjectives simultaneous and concurrentcan have the opposites separate or discrete.
Can mixtures be separated by physical change?
Some mixtures can be separated by physical changes. For example distilling alcohol can be done by heating the mixture to between the boiling points of water and alcohol, so the alcohol boils off, leaving the water. The alcohol is then condensed into another container.
When changing liquid should be added to the what side of the compressor?
When changing the liquid refrigerant in a system, it should be added to the high-pressure side of the compressor. This is typically done through the service port on the liquid line, which is connected to the high-pressure side. Adding refrigerant on this side ensures that it enters the system in a liquid state, allowing for proper operation and efficient cooling. Always follow manufacturer guidelines and safety protocols when handling refrigerants.
Are medical test required before leavng Egypt?
Yes. It is important to have a medical test done before leaving Egypt.
How can you remove an aircondition compressor without losing the refrigerant?
Before removing the compressor from a refrigerator or other appliances, you must 'reclaim' the refrigerant. This is done by connecting a compressor-pump on the access connection and pumping the refrigerant into an approved storage tank. once the refrigerant is out of the system, you crimp & cut the lines going into the compressor. There will be compressor lube in the compressor; don't spill it or let it leak out.
How we can separate freshwater from saltwater?
The separation is done by evaporating the water off as a vapour leaving the salt crystals (and any sediment) behind. The water vapour is then condensed back into fresh water. The process is called desalination.
Do canadians need any shots before leaving to Ireland if so when do they need to be done?
No, you do not need any shots before travelling to Ireland.
What does it mean when you ask for a check in restaurant?
It means that you want to pay the bill for your meal. It`s usually done before leaving the restaurant.
What does it mean when you ask for the check in a restaurant?
It means that you want to pay the bill for your meal. It`s usually done before leaving the restaurant.
Can be separated by physical changes?
Some mixtures can be separated by physical changes. For example distilling alcohol can be done by heating the mixture to between the boiling points of water and alcohol, so the alcohol boils off, leaving the water. The alcohol is then condensed into another container.
Manifold gauge fluctuates?
This can be a sign of a bad compressor and you will need to run a compressor check first, this can be done without draining the freon....
Can Mixtures can be separated by physical changes.?
Some mixtures can be separated by physical changes. For example distilling alcohol can be done by heating the mixture to between the boiling points of water and alcohol, so the alcohol boils off, leaving the water. The alcohol is then condensed into another container.
What happens if you hold a compressor hose to your skin?
This is dangerous and must not be done.
What would be done to increase the compressor speed on a belt-driven compressor?
increase drive pulley size
How do you use air compressor to inflate flat tire?
To inflate a flat tire using an air compressor, first ensure the compressor is plugged in and turned on. Remove the valve cap from the tire and attach the compressor's air hose to the valve stem, ensuring a secure fit. Start the compressor and monitor the tire pressure using a gauge if available, inflating until it reaches the recommended PSI. Once done, remove the hose, replace the valve cap, and check for any leaks before driving.
