The high power objective should be used when you need to examine smaller details or structures in a specimen at higher magnification. It provides a higher magnification level compared to the low power objective, allowing you to see finer details.
The objective lens of a microscope is responsible for regulating resolution and definition of the specimen. The quality of the lens and its magnification power play a key role in detailing the specimen being observed.
The nosepiece on a microscope is the part that holds and supports the objective lenses. It allows for these lenses to be rotated for different magnification levels. It is an important component for focusing the specimen being observed under the microscope.
Arm = supports top part of microscope Base = the part the microscope stands on Lens turret= a rotating support for the objective lenses objective lens or lenses are those closest to the object being viewed. Their degree of magnification is usually marked on the side of the lens, eg. 100x magnifies the object 100 times. The longer the lens, the greater its magnifying power. Eyepiece (or ocular lens) = This is the lens closest to the eye and its magnifying power is generally marked on the side. To determine the total magnifying power of a compound microscope, multiply the power of the ocular lens with the power of the objective lens. For example, a 10x ocular with a 100x objective would give a total magnification of 1000. A microscope may also have a binocular eyepiece with a lens for each eye. Stage Clip= holds the glass slide which contains a specimen to be viewed. Stage- holds the specimen. Coarse adjustment knob- makes large adjustments to the focus of the lenses. Fine adustment knob- makes small adjustments to the focus of the lenses Below the stage is located either a mirror or an electric light which directs light through the specimen on the stage.
The coarse adjustment knob controls the stage's vertical position in relation to the objective lenses. If improperly used under high power, it can damage the objective lens or the slide due to the rapid movement.
It's the objective.
The movable part of the microscope on which objective lenses are mounted is called the nosepiece. The nosepiece allows for easy rotation and selection of different objective lenses to adjust the magnification of the specimen being viewed.
Objective lens - Primary lens that magnifies the specimen placed on the stage.
The high power objective should be used when you need to examine smaller details or structures in a specimen at higher magnification. It provides a higher magnification level compared to the low power objective, allowing you to see finer details.
You would turn the nosepiece or turret on the microscope to switch from low power objective lens to a medium power objective lens. This allows you to change the magnification level and focus on different parts of the specimen being viewed.
The objective lens of a microscope is responsible for regulating resolution and definition of the specimen. The quality of the lens and its magnification power play a key role in detailing the specimen being observed.
The objective lens captures the light from the specimen in a compound microscope. This lens gathers and magnifies the light to provide a detailed image of the specimen.
The arrow would likely point to the cylinder lens, which is the objective lens of the microscope. This lens is responsible for magnifying the specimen being observed.
The part of the microscope that holds the objective lens is called the nosepiece. It allows for easy changing of various objective lenses to adjust the magnification during observation. The nosepiece is typically located below the stage where the specimen is placed.
The arrow is pointing to the eyepiece of the microscope, where you look through to observe the specimen being magnified.
Eyepiece: The part of the microscope where the viewer looks through to see the specimen. Objective lenses: These are the lenses closest to the specimen and are used to magnify the image. Stage: The platform where the slide with the specimen is placed for viewing. Condenser: A lens that focuses light onto the specimen for better clarity and resolution.
The part of the microscope that you put under the slide is called the objective lens. This lens is responsible for magnifying the specimen on the slide for viewing.