Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
180 Cst is Bunker Fuel with max viscosity of 180 Centistokes (Thinner). 380 cst is Bunker Fuel with max viscosity of 380 Centistokes (Thicker). 380cst is generally less expensive. Also variation with Low Sulphur, which increases the price. Current price of 180cst is 644/mt; 380cst is 635/mt.
"CST" stands for "Centistoke" and is a unit used to measure the viscosity of heavy oil. It indicates how easily the oil flows at a certain temperature, with higher CST values representing thicker, more viscous oil.
CST 180 (Centistokes at 40°C) is a measure of the viscosity of a fluid, specifically at a temperature of 40°C. It helps determine how easily the fluid flows or resists flow. In general, lower CST values indicate less viscous fluids, while higher values indicate more viscous fluids.
If it is 12pm EST, then it is 11am CST. CST is one hour behind EST.
The recommended viscosity for Heavy Fuel Oil (HFO) 380 CST is typically around 380 centistokes (cSt) at 50°C. This viscosity is important for proper fuel combustion and performance in marine diesel engines. It is crucial to maintain the recommended viscosity range to ensure efficient and reliable engine operation.
IFO 380 - Intermediate fuel oil with a maximum viscosity of 380 CentistokesIFO 180 - Intermediate fuel oil with a maximum viscosity of 180 Centistokes
it's a kind of fuel oil, and the viscosity is not over 180. wannna.com
it's a kind of fuel oil, and the viscosity is not over 180. wannna.com
IT MEAN THE PRICE OF HIGH SULPHUR FUEL OIL CST
The CST (centistoke) is a measure of viscosity. IFO 180 fuel oil contains less than 3.5 percent sulfur with a flash point of greater than 60C. The pour point is at 30C maximum year round.
180 Cst is Bunker Fuel with max viscosity of 180 Centistokes (Thinner). 380 cst is Bunker Fuel with max viscosity of 380 Centistokes (Thicker). 380cst is generally less expensive. Also variation with Low Sulphur, which increases the price. Current price of 180cst is 644/mt; 380cst is 635/mt.
fueloil 180 price pllat persian golf ?
"CST" stands for "Centistoke" and is a unit used to measure the viscosity of heavy oil. It indicates how easily the oil flows at a certain temperature, with higher CST values representing thicker, more viscous oil.
CST 180 (Centistokes at 40°C) is a measure of the viscosity of a fluid, specifically at a temperature of 40°C. It helps determine how easily the fluid flows or resists flow. In general, lower CST values indicate less viscous fluids, while higher values indicate more viscous fluids.
Fuel oil is a fraction obtained from petroleum distillation, either as a distillate or a residue. Broadly speaking, fuel oil is any liquid petroleum product that is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power, except oils having a flash point of approximately 40 °C (104 °F) and oils burned in cotton or wool-wick burners. In this sense, diesel is a type of fuel oil. Fuel oil is made of long hydrocarbon chains, particularly alkanes, cycloalkanes and aromatics. The term fuel oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil, heavier than gasoline and naphtha.
Furnace oil is mainly measured in centistokes (cST). It could vary frm 0-1000 cSt. It basically means the quality of furnace oil used in your application process. For eg. In Furnace oil boiler its mostly recommended at 125 cST grade to be used. The better the furnace oil the better its is for your equipment giving less maintenance cost and saving energy in process. There are other factors like pour point, flash point, etc which are also major factors in furnace oil and would be available with your furnace oil supplier.
HFO = Heavy Fuel Oil 380 CST = the grade of fuel oil representing viscosity, quality, etc.